|01-10-2013 02:22 AM|
|PeterN1986||I have a 20H with a Ray2 and I had to put two layers of window screen since I was getting algae issues. I now have it suspended like 8" above the water level.|
|01-09-2013 04:58 AM|
Fugeray 30 or ray 2...
I want a medium tech planted tank on 20g long. Which lighting would be best?
|12-08-2012 12:40 AM|
Just received my FugeRay 16" for my Fluval Spec V (5G). I think its perfect for low-light. Remove the legs and you will approach mid-light. It also makes the tank pop compared to the stock LED light assembly.
I think for any tank around this size, the FugeRay 16" is perfect. It's also clear that the Ray II 16" or 18" would be far too much for low-tech setup (unless all you're growing are mosses).
|12-06-2012 02:00 PM|
|bradlgt21||If you want low tech why upgrade? I have the old halogen version of the fluval edge 6. I swapped out the bulbs for stock replacement LED's. I grow crypts, java fern, and anubius nana petite very well with this light and the tank is almost 100% algae free, but that is probably with some help from the cherry shrimp and couple nerites running around.|
|12-06-2012 01:33 PM|
I just received the Fugeray 24" for my 15 gallon (12" depth) and couldn't be happier. The RayII would definitely be overkill for a low tech tank.
|12-06-2012 08:46 AM|
|sepulvd||i say go with the fugeray. i just bought one for my 6G and i feel its the perfect light for it|
|12-03-2012 07:09 PM|
|somewhatshocked||Quite welcome. The Ray II would definitely be too strong for you. I think you'll really enjoy the FugeRay.|
|12-03-2012 04:58 PM|
Thanks somewhatshocked for your input. I think I'm going to stick with the 16" Fugeray for my Fluval Spec V.
I'd love to get the Ray II 16" but I'm afraid that will be too much light and I don't have a means of hanging any light fixture at this point - so it must sit on the tank itself.
Thanks for your input somewhat.
|12-03-2012 12:50 PM|
If you get the 12, you may not have great light spread unless you hang the fixture above the tank. I think that's all you'll need but some others will likely chime in.
STS: I was surprised by the intensity of the FugeRay. For instance, the 20" is so much light on a standard 10gal tank that I have to use a few layers of window screen to dampen things so I don't have algae issues.
|12-03-2012 04:45 AM|
okay I will go with the fugeray... so 12" or 16"???????????
I will use the stock lights on the fluval edge for the blue led moonlights (I will have both lights on different timers).
|12-03-2012 01:09 AM|
Somewhatshocked, would 30 PAR be good for shorter, more compact growth for low-light plants (e.g. crypt parva and red wendtii).
I'm still unsure about if the Fugeray's 30 PAR or Ray IIs 49 PAR is better for a non CO2 and simple ferts setup.]
To Soup, I think an upgrade is worth it. Well lit Edges look amazing and many people have maintained low maintenance edge's with upgraded lighting. You could always diffuse the light it if it gets to be too bright. I think the stock light makes for a darker, shadowed tank (which is fine if you like it that way).
|12-03-2012 12:35 AM|
What about keeping the stock LED lights, and adding blue lights that stay on 24/7.
That way I can put stock daylights on a timer, and at night the blue LEDs are on only.
I wanted to upgrade lights to cover the dead spots, but it seems upgrading is overkill on such a short tank.
|12-03-2012 12:27 AM|
I think the 12" would be absolutely perfect. But a 16" (isn't the tank 16" wide?) could also work for you.
It's pretty easy to cut light levels down with some fiberglass window screen or other light-filtering material used in photography. So if you find you've got too much light and don't want to raise the fixture up, you can put some strips of material beneath the light to get things where you want them.
|12-03-2012 12:17 AM|
Should I go with a 12" fuge ray then? It will be less pars...
I dont want to dose or have c02.
My substrate will be mineralized topsoil capped with flourite, all low tech plants.
|12-02-2012 11:28 PM|
30 would be nice, low light.
But the Edge is shallow. Add in substrate and things are even more shallow. The Edge is only eight or so inches deep/tall, if I remember correctly.
|This thread has more than 15 replies. Click here to review the whole thread.|