|07-19-2013 12:18 AM|
I set one up today
|07-18-2013 01:05 PM|
I have used, dissected and re-built the 10w straight up cold white version and have seen many people using them after googling the subject. Two 10w units lit up my 24" tank. Medium light I guesstimate.
They are a good idea if you can get them cheap and dont feel up to the task to building a led from the same led chips/drivers found dirt cheap. They come with water resistant (claimed waterproofish but quality varies) casing if you plan on mounting them inside a hood. The glass is very thick and will eat up a lot of the light. Removed and the housing becomes a bit pointless imho, thus my diy comment below.
They added lots of led shimmer and grew my plants, removed them because I started to get algea problems (low tech non-co2 tank)
If you´re handy I would recommend buying the items needed from ebay and build one that suits youre needs. Much cheaper, and you can customize with active cooling different lenses/reflectors.
Edit: Found some old comparison pics of mine, dymax vs 10w flood led:
Some different test builds I made cpu heatsink with original reflector vs random heatsink found in electronics shop with 2x10w:
In the end this 36w par38 bulb was the best buy. Cheaper than flood, better focus, less shimmer, more light, easier to mount, better looking and so on...
|07-18-2013 02:15 AM|
|07-18-2013 01:59 AM|
|morelight||these floods make the tank look fantastic. reminds me of metal halide. now i have to figure how i'm going to hang them. I was thinking of pvc and elbows coming from the back of the tank in a 90 degree angle and hang them.|
|07-11-2013 05:03 PM|
|acitydweller||i can tell you with fair certainty with experience backing that i was able to grow a healthy amount of algae with a 10w Flood sitting on a versatop. I use the COOL white which is documented at 6000k. This is a low tech setup for my crayfish and the glass is often seen with cray babies feeding on the algae.|
|12-02-2012 06:25 PM|
|talontsiawd||No insight, just want to see where this goes. Some actually look pretty attractive. I wouldn't mind trying one of these on my nano but would love someone else to figure it out for me first . That's why I love this board lol, everyone jumps on these things and will have par data before I would get around to doing it anyway.|
|12-02-2012 05:18 PM|
|Sethjohnson30||I just used but connectors for now now I plan on soldering it when I add a switch|
|12-02-2012 03:38 PM|
|james1542||Nice Job Seth! Looks like it will make an awesome rack light. Did you end up soldering that to wire it or, use some other means? The 10W doesn't look very big you could easily cram 3 of them over a 10g. The 30W I have looks to be about 3x larger . So far the plants are loving mine.|
|12-02-2012 06:09 AM|
|Sethjohnson30||They are sold in many different temperatures mine is 6000k|
|12-02-2012 05:32 AM|
|Vincent Tran||How do you know if they are the right Kelvin temperature or not?|
|12-02-2012 04:18 AM|
|Sethjohnson30||Wow I posted on too many threads about this subject I wired it up and mounted it|
|11-30-2012 10:54 PM|
Have you seen this thread about these lights: http://www.plantedtank.net/forums/sh...=195589&page=2
There is a link in there to a How to on wiring these up.
I have the 30W on my 20 gallon and it is sufficiently bright. Me-I always want more light, but it has all my plants growing fast, including Erio cinereum (that may be due to some DIY CO2 as well..
|11-30-2012 09:57 PM|
Well for some reason I can't upload pics right now
It has 3 wires
|11-30-2012 09:53 PM|
I got the light today of course it has no plug........
Can I just splice a plug on to it? Or do I need some sort of converter?
|11-24-2012 02:29 AM|
|Sethjohnson30||Well I have a soldering iron but I'm horrible at soldering(go figure a certified TIG welder that cant solder) hopefully mine plugs into the wall. I'm putting mine in my wire shelf rack....I will probably just attach it to the top shelf with zip ties lol|
|This thread has more than 15 replies. Click here to review the whole thread.|