|Topic Review (Newest First)|
|11-24-2014 10:21 PM|
|inthepacific||i use the shower caddy thing as well. i put half filter floss half biomedia in the AC and then a purigen in the shower caddy. really good.|
|11-24-2014 06:54 AM|
|Salvanost||bump this awesome idea|
|11-28-2012 02:23 AM|
|wicca27||i like the elite mini filter just on its own for flow in a tank. i have one going right now in a 1.3 gallon tank but i take the out flow and flip it upside down so it points the current up and out instead of kinda down and out. shrimp dont seem to mind at all and the flow on it is adjustable. i used to use the same filter to move diy co2 across a 10 gal tank by hanging it on one end as well. ill get a pic and show what im talking about if you would like|
|11-28-2012 01:57 AM|
Sorry - I should have been more specific. It's this unit:
They used to sell them at Petco but I think that's no longer true (it's where I bought mine). It has a flow control lever on it, too. Overall I can't think of anything negative about this super little filter. Plenty of umph, flow control (I had it turned all the way down in the breeder box otherwise the cories were tossed all over the place). It really is a great little filter for $8!
I recommend it for that breeder box. It's almost as if they were designed for each other. The output on the filter fit perfectly snug, with no additional need for support.
|11-28-2012 01:48 AM|
Originally Posted by m00se View Post
What is that Hagen Elite model exactly? Is that a filter or a pump only? Been trying to find something else to use.
|11-28-2012 01:35 AM|
Originally Posted by mach_six View Post
I used a Hagen Elite filter on mine and it worked great. The uptube on the Marina fit in the output of the Elite nice and snug, no muss or fuss.
Truth about the blockage!! But that setup worked like a champ for my cory fry.
|11-27-2012 09:39 PM|
|GeToChKn||The way that I test flow in my tanks is using a TDS meter. Test your TDS in both ends and middle of your tank. Should be +/- a few ppm. Then do a water change, usually with a lower TDS water, so see how long it takes for that water to spread out in the tank. If after a hour or two, the left side is 180 and the right side is 150, there isn't proper flow. If after 15 mins it's 175 across the tank, you're good.|
|11-27-2012 09:14 PM|
|Betta Maniac||I was honestly thinking about doing 4 large sponge filters as I've seen some of the more advanced shrimpers doing. Just trying to work out a plan. I think I have a spare HOB laying around...maybe I'll do that. Don't want to blow them away!|
|11-27-2012 09:02 PM|
|randyl||I didn't like too much flow so I came up with that idea which also increases the filtration capacity. Flow in shrimp tanks is a personal preference. I make sure moving water everywhere but to a minimum. That AC 150 + DIY thing helps me achieve all the goals I had. I have shrimp tanks with canister filter and the result isn't better than tanks with this setup. BTW, mine also caught some riccia and it grew pretty nice. I put a few piece of peacock moss on the front side (between the front and the filter floss), and they grow very nicely too.|
|11-27-2012 07:12 PM|
|Betta Maniac||Sooooo, question: I was going to leave my canister filter on my new BKK tank. The shrimp in my other tank don't seem to mind the flow from the Ehiem, and the SunSun has the bar pointed backwards to reduce flow. Is this a bad idea? Should I pull it and just put some of the cycled media into a hob?|
|11-27-2012 07:07 PM|
|ThatGuyWithTheFish||That's a good looking idea. Maybe attach moss to it to make it looks more natural?|
|11-27-2012 06:54 PM|
Originally Posted by Darth Toro View Post
|11-27-2012 06:38 PM|
Originally Posted by randyl View Post
Randyl what exactly is that your using? It looks like a great idea. I was trying to find ways to reduce the flow of my aqua clear 70 that I have on a 20 gallon long with rilli shrimp inside
|11-27-2012 05:38 PM|
I used the Marina for my s/w tank for some small macros and shrimp. I use it with the hydor pico pump instead of an air pump for constant and quiet flow. You'll need some tubing that fits on the pump and the marina inlet tube. The pump itself is iffy, I bought 2 and 1 didn't work out of the box.
My caution with this is that the water goes all the to the top and if you have any blockage of the return you're going to have a wet floor.
|11-27-2012 04:04 PM|
|plamski||Nice Idea.You can use Marina one for $10 too.it is 1/2gal.Finnex is 3/4gal the most.|
|This thread has more than 15 replies. Click here to review the whole thread.|