|11-27-2012 03:47 PM|
|Tcal01||alright ill try your guys's suggestions. thanks for all your prompt responses|
|11-27-2012 02:04 PM|
|mcaquatic||the flow probably isn't as strong as you think. Furthermore this filter is known for loosing power over time.|
|11-27-2012 01:44 PM|
|alipper||I have an FX5 in my 75 gallon and the flow isn't as strong as I thought it would be. I did put a good amount of filter media and sponges in the filter though.|
|11-27-2012 11:44 AM|
|ChadRamsey||if you feel the need to reduce the flow a tad, where the hose attaches to the top of the canister, there is a nob that you can adjust to reduce the flow. I did this on mine as well.|
|11-27-2012 07:44 AM|
|Steveboos||Honestly the Flow isn't that strong for most fish. My Fx5 and Angels are perfectly fine and they have been in that tank for around 8 months. If you really want to slow it down, just pack tons of filter floss in the canister trays and that will lower you from 680 GPH to around 450 GPH.|
|11-27-2012 07:40 AM|
If you have some quick disconnects, you could reduce the flow on the output (not the input) side.
Alternatively, if you are using a spray bar, you could drill slightly larger holes, etc.
Even a sponge placed in front of the filter return would slow down flow.
|11-27-2012 06:48 AM|
FX5 Current Help
my 90g has recently finished cycling and i have been thinking about stock for a really long time, basically before i even got the tank. i have noticed that the fx5 throws arounf a lot of current/water flow which i am worried about since i am going to be stocking the tank with some angelfish and possibly some other fish that arent well adapted for such high current. do you guys know of any way to reduce the current, whether it be on the filter itself or if i have to fabricate something? im not trying to make this tank a river biome or anything, thats for another time...