|Topic Review (Newest First)|
|11-20-2012 12:36 PM|
Originally Posted by lochaber View Post
|11-20-2012 02:32 AM|
I haven't tried DogFish's method, but for thinner pieces I've had good results with a thin, very sharp knife.
For thicker pieces, I've compressed the foam between two boards (if they are two narrow, the edge will be funny), and then using a thin, sharp blade.
I've also heard of (but not tried myself) of people soaking the foam in water and freezing it, and then drilling into it (to make a foam prefilter or something similar).
|11-20-2012 02:06 AM|
|DogFish||I forgot to mention, the easiest way to cut foam is with an electric carving knife. I put a 1x4" board on either side of the foam as a guide to make straight cuts. Have the part you want remove extend out from the board like a miter box for cutting wood.|
|11-19-2012 10:53 PM|
DogFish has some good advice up there.
I just want to second the bit about carbon not being necessary. The two main uses I can think of are trying to remove either medication or tannins from the water (which I would suggest not doing, they can be pretty beneficial to both plants and fish).
Back when I started, I had one of the old Tetra HOB, and it had a similar cartridge system. This was back when I still thought carbon was necessary.
I'm not sure specifically what I did anymore, but I cut open one of the old cartridges and either reclosed it, or encased it in nylon or a media bag or something similar, and would fill that with carbon that I bought in bulk containers.
If you have trouble fitting a sponge, you might be able to strip one of the old cartridges and use the frame from it as something to embed the sponge inside of.
|11-18-2012 05:00 PM|
|partobe||i have 2 hob filters and ive never used filters I just do reg water changes and watch how much I feed|
|11-18-2012 01:43 AM|
|11-18-2012 01:33 AM|
|DogFish||Here's link for AquaClear sponges: http://www.drsfostersmith.com/produc...m?pcatid=18352|
|11-18-2012 01:31 AM|
I just took this one for you
On the right I used a sponge on the left I have Growstones a hydroponic media that I use in my Aquaponic System. I'm starting plants in that one.
These are on my Toxic Ten tank. I keep the one running with the sponge for use my Q-Tank. This way I always have an active filter running if I need it.
|11-18-2012 01:11 AM|
Originally Posted by Gold Finger View Post
|11-18-2012 01:04 AM|
|Gold Finger||+1 to DogFish's reccomendation. No need to buy anything on an ongoing basis. The foam will last and last and is all you will ever need. It does not loose its bacteria if rinsed, as instructed, in tank water. Better yet, once it gets a bit older the bacteria will develop a very sticky nature and will polish your water as good as anything can. Superclean.|
|11-18-2012 12:58 AM|
|11-18-2012 12:40 AM|
There is a much easier way to deal with this.
Get an AquaClear filter sponge in a size larger that the filter box of your HOB. Toss all your cartridges in the trash. Cut the Aquaclear sponge so it fits snugly into the filter media area of you HOB. Leave 1/2" of open space under true sponge to aid circulation.
All you do going forward will be to squeeze out the some in water remove during water changes (Old Tank water). The sponge will last for years. I have done this for over 20years in all my HOBs, a pond, and a reef tank sump.
If you ever need chemical filtration. You can put some Carbon in a bag made from a woman's nylon stocking. Place the carbon bag under the sponge. Of course the sponge will ride a little high in the media box while running the carbon bag. That is a non-issue.
This is a Sponge replacement I cut to fill the unused Chemical Media container in am Fuval G3
|11-18-2012 12:21 AM|
Originally Posted by tinkerpuppet View Post
|11-18-2012 12:09 AM|
I found this video on how to use your own media in a hob. I have an Aqueon 20 and while I'm using the cartridge that came with, I will replacing it with my own. I have regular sponges, some of those green dish scourers, and the softer plastic dish scrubbies to use.
|11-17-2012 11:54 PM|
Originally Posted by hotrodprincess View Post
My tanks do fine without the chemical (carbon) medium. If you change out half of the water in the tank every week, you really don't need to use it.
As for the rest, you can simply rinse it well in some of the old tank water and put it back in the filter. Eventually, it will start to fall apart. At that point you should replace it. But it can be reused for several water changes.
|This thread has more than 15 replies. Click here to review the whole thread.|