|11-04-2012 05:58 PM|
I checked out the pfertz site and the quantities and prices are more than I want at the moment.
The Seachem "enhancer kit" is is less than $12. I think it would be a good place for me to start.
Thanks for the advice.
|11-04-2012 04:47 PM|
|Robotponys||They also have root tabs|
|11-04-2012 04:47 PM|
|Robotponys||Go to pfertz, they have a 45% discount. The full npk+m is a little less than $50 including shipping. Expensive for a big tank, but should be good for smaller tanks. I got some.|
|11-04-2012 04:46 PM|
|11-04-2012 04:21 PM|
My suggestion to someone just getting started is to go ahead and buy liquid fertilizers first.
and see how things go, how much of each you are adding and the plant response.
Then buy the dry ferts and refill the bottles with the same amount of active ingredient. By then you will be much better prepared to alter the formula to suit the way your plants respond.
|11-04-2012 02:55 PM|
How much light do you have over your aquarium? Light is a main driving factor into whether or not CO2 and fertilizers become a necessity in your aquarium.
The more light you have, the more important the balance between all three becomes.
Since you have CO2, there is no need to be adding Excel at the same time; in fact, CO2 is much better than Excel.
As for fertilizers, as you already know, plants require macronutrients and micronutrients. Of these macronutrients, NPK are the ones that are dosed, while a trace mix is used to dose micronutrients.
For fertilizers, you could always go with commercial products if you want, but they can become very expensive in the long run. Instead, I would recommend you get dry fertilizers instead, and dose from there. That is by far, the cheapest option available to you.
For more information regarding fertilizers and such, please take a look at my primer for planted aquariums linked in my signature below.
|11-04-2012 02:42 PM|
What would make a good fertilizer starter kit?
I recently set up a planted tank and so far, so good. My plants look like they're doing okay. Some are growing, others not so much, but still look healthy.
I have a CO2 system and and Flourish Excel that I've used periodically.
Now, I'm wondering what I need to do to keep my plants growing and healthy...
Should I be adding also adding phosphorus, nitrogen and potassium? I've read here that is what many others do. I saw an "enhancer kit" from Flourish with these fertilizers. Is a kit like this suitable?
What about root tabs? Would those be an suitable alternative to using a combination of the above chemicals?
I guess what I need to know is what do I do now? Sorry for all the questions but after reading the many posts on fertilizers here, I'm confused.