|11-13-2012 07:17 PM|
If the soil has some mixed particle sizes and shapes it ought to hold a gentle hill just fine.
If you want a steeper hill you may have to build something like a rock wall, not have soil on the face of the steepest part, just like in nature: Hills of soil are usually softly rounded, not sheer or vertical. Where the hill is steep it is because there are rocks.
Sand and gravel flatten out really fast.
|11-13-2012 06:27 AM|
|In.a.Box||what about making hills with MTS(soil)?|
|11-11-2012 01:59 PM|
|10-21-2012 07:38 PM|
This works for presentation purpose very well. I did the same as in the video - looks very nice for a week or two. Then plants replanting begins and things start to mix up. I also introduced botia kubotai loaches and substrate was all over the sand in less than 2 days
Now, that sponge idea might be a better solution. Will try it later on.
|10-21-2012 06:24 PM|
|10-21-2012 03:40 PM|
|Bubba_Shrimp||It also depends what bottom dwellers you have. Loaches and some cory will mix the substrates in no time.|
|10-21-2012 01:59 PM|
Sent from my iPad using Tapatalk HD
|10-21-2012 01:39 PM|
|Gabez||If it mixes too much , I think I will vac the sand out and replace with a small white gravel that wont mix so easily|
|10-21-2012 08:07 AM|
Check the vid. Scroll to about 19:30 in. There's also some before that where's he's making the hill... seems like a good idea. I also just came up with and idea of utilizing organic cheesecloth to separate layers (MTS/Sand cap) I'm not sure I'm the first one to think of it. I'm sure the sand will mix after a while... but I'm hoping my HC's root system will prevent that (and by that time.. it'll be so thick it won't matter) Good luck!
|10-21-2012 07:50 AM|
Sent from my iPad using Tapatalk HD
|10-21-2012 05:41 AM|
I use the black expanding foam that is made for ponds, and 'mortar' together some rocks. This makes a divider that looks more natural than the plastic strips, and works just perfectly because the foam sticks just fine to glass and to rocks.
Any 'sort of' divider like a row of rocks with no 'mortar' is going to allow the substrates to mix. I just took down a tank like that. Pool filter sand and Soil Master Select. Totally mixed because the row of rock were just that, nothing between the rocks.
|10-21-2012 02:50 AM|
I would put sand from floor to top where you want your sand river design. Maybe fill with the amazonia then scoop out the path till bare glass shows and fill with sand. Some sand may mix under horizontal and need topping off later, but would be better than being stacked on top.
That's what I would try, but I haven't tried, so just a suggestion. I have no physical experience with such a design.
|10-20-2012 10:48 PM|
|ddrfreak_tung||i've seen a vid of a scaper in the uk using different substrate and creating high mounds by inserting strips of plastic to divide/help the substrate from flattening out over time.|
|10-20-2012 09:38 PM|
Just so you guys know over time the smaller graines no mater what it is will settle to the botom. I have had this happen in my 55 and it has been going for 5+years. I know have perty much 1 mixed substraight no differentaion any more. It had florite black, eco complete, Black sand an tahitian moon sand black.
|10-20-2012 09:17 PM|
|Gabez||I just finished doing a sand path in eco complete , I put the eco in first , shaped my hills and used flat rocks to make a base for the sand , I lined the path with river rocks then poured the sand in. so far its been about 2 weeks , its holding up well. I used a garden hose with the mist setting to fill the tank after.|
|This thread has more than 15 replies. Click here to review the whole thread.|