|Topic Review (Newest First)|
|03-22-2013 08:45 PM|
|Mizuhuman||I am using the Marineland Emperor bio-wheel power filter. It is the only one i have for the 29gallon|
|03-22-2013 04:15 AM|
What type(s) of filter(s) are you using on your tank?
|03-22-2013 03:16 AM|
|Mizuhuman||Alright I know what to do now, thanks seattle aquarist and where can i buy polishing pads?|
|03-22-2013 01:07 AM|
Definitely use a filter to speed up the clearing process. Here is a 20 gallon I set up the first of the month.
Rinsed 5X per gallon of substrate in bucket; After filling
After 24 hours using Marineland C-220 with polishing pad
|03-22-2013 12:57 AM|
|Mizuhuman||hello I bought Safe T Sorb from the website that Trickerie provided on the first page. How long does it take to clear up? Should I turn on the filter to speed up the process? or should I leave it alone and let it settle and keep changing the water?|
|03-18-2013 03:20 AM|
Does this stuff work good with ground cover plants such as HC/Glosso? How heavy is it? Similar to flourite?
Also to charge the substrate could I pour some osmocote plus on the bottom of the tank and then cover with STS? Or does it have to be put into 00 size capsules?
|02-25-2013 11:07 PM|
Originally Posted by Jnad View Post
According to my research, any of the high CEC clay-based substrates, i.e. kitty litter, Safe T Sorb, Turface, or otherwise chemical absorbing materials will initially lower the KH/GH by leeching it out of the water. Eventually, the material reaches an equilibrium wherein it stops absorbing KH/GH and matches the KH/GH of the water columnů
Of course, the pay off of this initial KH withdrawal side effect, is the long term CEC benefit of the material storing nutrients for the plants to use over time.
I am currently buffering my new Safe T Sorb tank with crushed coral and will be testing to see how long it takes for the STS to stop absorbing the KH. I am considering adding baking soda to expedite this process as well.
|02-25-2013 10:49 PM|
Is the use of cat litter give the same results when it comes to KH/GH dropping?
|02-25-2013 10:14 PM|
STS API KH Test False Alarm... Sheesh...
Thanks for your time, Roy and Diana.
Finally, I realized that I mistook to the instructions on the API test kit. I was accidentally expecting the water to turn from yellow to blue, instead of blue to yellow... Oops. This is pretty ridiculous especially considering I have run this test quite a few times... User error. Maybe it's having two kids under 2 that is sapping my intellect. Anyway, Now it all makes sense. The KH in the STS water is zero, hence why I am never seeing any blue in the test liquid. The STS is extracting the KH as would be expected...
Now I added a small bag of crushed coral to the filter in the STS tank. I am thinking that this carbonate buffer will "feed" the STS until it eventually stops pulling it out of the water...
Great stuff, BTW, STS. I followed your advice and went through W.W. Granger to get a bag locally in Portland. Thanks for the tip! Very easy to work with, looks great, cleared up fast, and so economical...
Here is a pic of the STS tank:
|02-23-2013 08:25 PM|
My original experience with a substrate that removes carbonates was in 29 gallon tanks with a Fluval 204 canister, and not much substrate or decor. I was calling the volume 30 gallons. I also had SMS in several other tanks from 10 gallons to 45 gallons. Varying amounts of non-water stuff taking up the room in the tank.
At the same time I was running a Lake Tanganyikan tank of about 60 gallons (Sump + tank, but there was a lot of rock in this one. Actual volume was closer to 50 gallons). I needed to prepare the water for water changes by raising the GH and KH of the tap water. I would mix a garbage can full and use it for several tanks with hard water fish.
Soil Master Select as the substrate in the 29 gallon tanks would remove the carbonates, per API liquid test and dip stick test (Probably Jungle, but there are several companies that make them). As near as I could tell the KH was 0 degrees (0 ppm on the dip stick test)
When I added 2 teaspoons of Arm and Hammer Baking Soda to the 29 gallon tanks these tests would both show 2 dKH. I realize the dip stick does not have a "35 ppm" color, so this is interpolating between the colors. It was really close to the 40 ppm shade of green.
I run SMS in many tanks of different sizes, and multiply or divide the dose to get the results I want depending on the size of the tank.
I got the same results when I was preparing the water for the Lake Tang. tank. 30 gallons of new water, starting with tap water KH 4 degrees. Add 2 tablespoon and the KH would rise to 16 degrees.
Then I set up an 88 gallon tank with Safe T Sorb. I found it also dropped the KH to what I called 0 degrees.
I added varying amounts of baking soda and tested the results. I found the math holds true:
1 teaspoon of baking soda added to 30 gallons of water raises the KH by 2 German degrees of hardness.
I also altered the test by mixing 50/50 distilled and tank water then multiplying the results by 2. I was measuring the water to fill the test tube using a syringe with markings to .5ml.
You can multiply or divide this recipe to suit any size tank, any desired change in KH.
However, if I was going to attempt a much larger change I would probably work it part way, then test again. I was not measuring the baking soda by weight, which is the more accurate way to do this sort of thing. I know when I got a bit careless mixing water for the hard water tanks the KH did not exactly match the tank.
|02-23-2013 07:34 PM|
I Caught My Error in Reading the KH Test...
Originally Posted by TylerD View Post
Great stuff, BTW. Very easy to work with, looks great, and economical...
|02-23-2013 05:50 AM|
Very, very unusual.....have you by any chance added any stones or other items into the tank?
|02-23-2013 04:05 AM|
STS Giving a False KH Reading?
Originally Posted by Seattle_Aquarist View Post
Here's my issue: After 1 week with the STS tank set up, I decided to test the KH while testing the cycle progress (adding food, planted, fishless with seed media). The tap water I use measures 1dKH. I was expecting my tank to measure the equivalent or less considering that the STS might have absorbed the KH and I have not added any KH buffers. On the contrary, I could not, no matter how many drops added to the vile, get the test liquid to change from yellow to blue... At this, I performed a 50% water change and then ran the KH test again. This time it changed blue on the first drop, as did the tap water.
Out of curiosity, I took some fresh STS out of the bag and put it in a small container, added water, rinsed it, and added water and let it settle, so the water was clear. After approximately 5 minutes, I tested to KH. Again, I could not get the liquid to turn from yellow to blue. Side by side I tested the tap water without STS and it still measured 1dKH. Surely, the STS can't be increasing the dKH to 30++ (I gave up adding drops) immediately after adding it to the water! It's supposed to be inert right? If anything it should decrease the KH... I thought...
Lastly, I had some API 5 in 1 test strips handy and tried that. With this the KH square tested the same from both the tap water and the water with the STS in it. ~20-30ppm (as inaccurate as the strips are they were, at least, matching). This result lead me to believe that KH in the STS water is not affected, rather the liquid test was somehow affected.
My STS tank is at school, so I have to wait until Monday to test the KH again since that 50% water change today. I am really curious to see if the KH will still read 1dKH as it did immediately following the water change, or if the test will continue to be flawed somehow after 2 days time.
I thought I'd put this out there to see if anyone else has experienced the phenomenon with STS and the API liquid KH test.
Any ideas? Thanks for your time
|12-22-2012 04:39 AM|
Originally Posted by somewhatshocked View Post
I had no idea it was illegal. I thought sales on Ebay were regulated by moderators.
|12-22-2012 04:23 AM|
Yes, it's illegal.
Saving a couple bucks to break a multitude of laws is hardly economical. Encouraging such behavior is not acceptable.
People can and do face criminal charges all the time for improperly importing and handling plants.
You should visit a port of entry where mail is handled sometime. There are huge operations where fruits, vegetables, plants are dissected and catalogued. Any time plant matter is detected without proper documentation, red flags get sent up in multiple government systems. Repeat offenders receive special attention... to say the least.
If you think it's easy not to get caught? You're mistaken.
Originally Posted by Hilde View Post
|This thread has more than 15 replies. Click here to review the whole thread.|