|10-07-2012 06:36 PM|
|Bryanmc1988||that is true... do you have any that are 1/8 npt ports coming in soon? also how much would it cost?|
|10-07-2012 06:10 PM|
|oldpunk78||You can get them with a 1/8npt in port. I'm all out though. I just through this out there because you said you wanted to keep it cheap. The electrical adapter is to go from 110/220ac to 12vdc. Most of the small solenoids that are relatively inexpensive are dc. If you run ac current to them, they will fry.|
|10-07-2012 05:46 PM|
a mouse solenoid doesnt come with a bigger fitting to be mounted onto a 1/8" NPT? or a co2 regulator?
also the power supply cord that you are using.... doesnt that plug to a wall outlet? if so doesnt a standard U.S. outlet 120v ac?
|10-07-2012 05:19 PM|
^ You just clip the connector off and use your own. (the solenoid is 12vdc)
How you could directly mount it to a regulator:
^ Not recommended if you think it might get bumped once in while. Brass 10-32 fittings aren't that strong.
Hope this helps.
Oh, these solenoids only use something like 0.67 watts. They run quite cool. I would like to mention though that the temps at which solenoids run at really aren't as important as you might think. What is important is that it is rated for a continuous duty cycle.(will the components of the solenoid hold up while powered for 8hrs at a time...)Quality does tend to vary from one manufacturer to another in that regard.
|10-07-2012 04:09 PM|
what do you mean by running an inline? any pictures of what you mean? i might have seen it around but not sure what they are called so cant be 100% sure if i know what u ment.... also any pictures of your mouse solenoid and when else would i need to get it running... pictures would be great... also a picture of your power supply also =)
|10-07-2012 01:19 PM|
|10-07-2012 10:20 AM|
I have seen no-name-brand Chinese solenoids on ebay for about $20. I am actually about to order a few to try them out. (I have two reef tanks and I just set up my first planted tank)
This is one of those things that you probably shouldn't DIY.
|10-07-2012 04:47 AM|
|Hoppy||I would be surprised if you find a solenoid that doesn't run pretty warm, if not hot. As long as it is designed to run that way, no problem. Those designed for aquarium use should all work ok.|
|10-07-2012 02:46 AM|
You're only option for a solenoid that cheap is going to be [Ebay Link Removed] And you're going to have to be seriously patient.
I've got a used mouse solenoid you'd have to run inline(don't have to, but recommended) I could send you for about $20 bucks. You'd have to come up with a power supply though. (which I also happen to have...)
|10-07-2012 01:58 AM|
well not exactly, i'm doing this on only 1 tank... and i already have a single stage regulator which should work fine no need for a dual... also have a 5lb co2 tank full which should already cut the cost by half if not over...
i was just looking for a less costing solenoid so i can just have it on a timer with my lighting... know any that might be cheap? maybe around the 10$ range if even possible? saw some on ebay for like $40 shipped but didnt want to spend that much on one...
also looking to buy one that is not going to run hot but more like cool when running for 8 hours a day....
|10-07-2012 01:22 AM|
It kinda looks as if you may be trying to feed multiple aquariums from one reg. (just based on your question pic...) The more needle valves you want add, the more it will cost. Your post body can be the most expensive part of a build.
|10-06-2012 09:09 PM|
|Bryanmc1988||dam didnt know going co2 was so costly...|
|10-06-2012 05:34 PM|
|kevmo911||New, the mouse and mount are about the most inexpensive new solenoid out there. About $27 or $28, plus shipping, plus the voltage adapter you'd have to buy (and attach) separately. Unfortunately that's a custom-drilled mount (pm Bettatail), so no, they don't come like that. I'd have to check to be sure, but I believe one of the Clippard mounts comes with two outlets. Otherwise you'd have to build your own, or buy a manifold.|
|10-06-2012 05:14 PM|
|Bryanmc1988||are they cheaper then the normal square looking ones? price is what i ment...|
|10-06-2012 06:09 AM|
|nokturnalkid||That's a clippard mouse solenoid. There's a few people on here that sell them, bettatail and oldpunk are a couple names off the top of my head.|
|This thread has more than 15 replies. Click here to review the whole thread.|