|Topic Review (Newest First)|
|12-21-2012 08:51 PM|
My #1 want feature for this fixture:
w/o that I would walk and look for something else.
This is highly important so I can adjust brightness to my plants need.
this is what makes LED lighting great.
|12-20-2012 12:18 AM|
|NyteBlade||Is there any info on how the Ray 2's compare to T5HO lighting? For example, for a 24" fixture, would the Finnex Ray 2 be more or less PAR than an equivalent 24" 2x24watt T5HO fixture?|
|12-19-2012 08:05 PM|
Originally Posted by Phusis_Eidos View Post
|12-18-2012 10:47 PM|
Originally Posted by jbrady33 View Post
The 60P is 14" high and I am assuming the Finnex fixture sits about .5 to 1" above the tank given how it connects. Regarding Par and plant requirements, how does one determine what is sufficient? Take HC, it has a high light requirement, but there is varying opinions as to what range "high" falls into. Where would someone even begin to suggest a range if not from a scientist?
Tropicas website and other companies that grow aquatic plants must have a range they work with as a base. A par of 45 or 100 is a huge difference. I feel like I am shooting in the dark with this.
Lastly if I am to grow plants that are several inches above the substrate the par will increase. How do I keep GSA and other algae from affecting those plants?
I greatly appreciate everyone's advice! This community has helped me so much
|12-18-2012 06:21 PM|
The algae issue will be directly related to the height of the light off the substrate. I believe a 60 p is 12" deep and 24" wide. A 24" Ray2 is kicking out 74 PAR at that depth, you better be injecting Co2 unless you want an algae farm.
A FugeRay light of the same size is 45 PAR at that depth, Co2 would still be a good idea but you could get away with Excel/glut dosing.
With either light you could raise it higher (hang it instead of mounted on the tank) or use window screening to cut down the light. If I were going the screening route I would take the end cap off the Finnex light and slide the screen inside the plexi splash shield.
(Sorry Lowe - had to add something involving taking it apart )
PS: From what I understand the HC and bonsai are going to require real Co2 injection to grow well, never tried myself.
|12-18-2012 04:38 PM|
I am in the planning stage for a 60p scape. I am almost convinced to go with the RayII 7k fixture, but I am concerned it will be to much light and algae issues will arise. From what I have researched too much light can be very destructive.
Anyone have thoughts on this?
My plant list includes
1. Hemianthus Callitrichoides
2. Ammania Sp. "Bonsai"
3. Fissidens Fontanus
4. Taxiphyllum Sp. "Flame moss"
On a side note I would love to see the previously mentioned upgrades as I would be 100% convinced . One Idea might be to take a plastic privacy film and place it on the fixture to diffuse the light more?
|10-22-2012 10:58 AM|
Enclosed top tanks - on the plastic brackets, the inner flange is removable, kinda slides out. If you take that off, get rid of the clear screws, and adjust the slides so that the outer flange hangs over the edge, you'll be good!
if it were me, I would then put one drop of super glue on one slide on each side, just enough to keep it from moving wider, not so much that I couldn't break it loose if I needed to later.
|10-21-2012 12:05 PM|
|spidernids||Any update on the more advanced Ray 2????? I am anxiously waiting.|
|08-28-2012 03:28 PM|
Originally Posted by temple2101 View Post
|08-28-2012 03:28 PM|
Originally Posted by Ach1Ll3sH33L View Post
|08-26-2012 06:43 PM|
Originally Posted by nokturnalkid View Post
|08-26-2012 06:11 PM|
Ive had a 36" ray 2 over my 12 gallon long tank for only a week and my plant's are doing remarkable, look much healthier than when they were under t5-ho lights, couldn't be happier! now time to save for a 24" ray 2
|08-14-2012 05:37 PM|
If this was addressed in the thread earlier, sorry...I didn't bother reading, just jumped to the end.
I recently bought the 36" DS...
Pros: its slick and thin, lightweight and bright.
semi-Con: the brackets can't be used on an acrylic tank because my tank is enclosed on the top.
I have a 50 gallon which is 36" wide x15" x 18" (or something like that) high.
So, when I put the light in the middle...I feel the back and the front doesn't get enough light.
Then again, before this I was using two 36" 96w Coralife which was probably was overkill. LOL
In all, I really like the Finnex product. I might have to eventually get another one and see how that looks.
|08-06-2012 03:01 PM|
Originally Posted by Green_Flash View Post
For a more detailed explanation read through TPT member, Hoppy, posts. One of his that is surely worth reading through: http://www.plantedtank.net/forums/sh...d.php?t=184368
|08-06-2012 02:54 PM|
Originally Posted by spidernids View Post
|This thread has more than 15 replies. Click here to review the whole thread.|