|Topic Review (Newest First)|
|08-03-2012 05:06 PM|
Originally Posted by kevbshields View Post
In your case, if you really wanted to move forward, take out the cracked glass, remove the sealant with a heatgun and then silicone in a new piece. Then put a piece over the slate and silicone that to the other four pieces. Silicone won't stick to the slate but it will stick to the glass. You get a silicone sealed tank, just like a new one but with a stainless steel frame. Best of both worlds.
|08-03-2012 04:57 PM|
|kevbshields||After 26 years of keeping fish, I do believe this more of an art (and luck) than a science. I know not everyone will agree with me, but that's my philosophy. Thanks. I'll try and post pictures once I get it up and running. Disclaimer: I'm not setting this up to be a showpiece, but for the pure enjoyment of a larger tank in my office. Aquascaping will be simple and reflect the hobby's heritage.|
|08-02-2012 10:17 PM|
|Jegli09||Good Luck with the tank!|
|08-02-2012 04:28 AM|
Originally Posted by kevbshields View Post
I have a crap ton of 1950-1970's books and magazines if you want some more inspiration. lol
|08-02-2012 04:14 AM|
I give up. A MetaFrame would look really great in my office, but I'm not up to the task(s) of having to rebuild one. I'll take the sign, no Metaframe for me. Too, the hassle is just too much or what I've got going on. If anything, this tank should help me maintain my sanity, not cause me to loose it.
Despite my objection to them, I bought a 20G Long at Petsmart. (Head hanging in shame.) The price was good, so we're moving forward. I still intend to take my 2 resident wagtails and give them a harem. I'm still sticking to that Gold Gourami . . . I've not had one in ages. So far, I'm not being original, but going back to my roots--the fish I kep in high school! Anyhow, suggestions on barb or tetra species? I want nothing tiny (e.g., embers, neons) that the Gourami could harass, no tiger barbs . . . little fin nippers. At this point, I'm open, but not even convinced barbs or tetra are the way to go.
|07-28-2012 11:10 AM|
I appreciate the suggestions, some of which I'd researched beforehand. However, I have to put all this on hold; it seems UPS did a number and cracked the slate bottom. This has a created a seam on the inside bottom that runs the entire width of the tank and another on the outside bottom of the tank, near the middle support, which the far more troubling of the two. Though the cracks do not appear to penetrate the depth of the slate, I'm not taking my chances on this thing springing a leak in my office. Now I'm fully disgusted.
Pictures added to my profile albums
|07-27-2012 04:04 AM|
|mannye||I can't see that shattered glass being too much of a mission to fix. AS Graphic says though, it might be that asphaltum so you want to get a heat gun and scrape everything clean first. I bet a good glass shop will do the install for you in no time. Love the slate bottom! Must see a pic!|
|07-27-2012 03:42 AM|
|GraphicGr8s||If it's original the sealant is asphaltum. No longer made. There is one good thing about it though. If you heat it with a heatgun or possible a hair dryer it melts. So you could soften it up and scrape it off. Then take it to a glass company and have new glass cut. Maybe they'll install if you provide the aquarium safe silicone.|
|07-26-2012 04:50 PM|
|reddhawkk||I just resealed my 15Long a short time ago. I took out all the old sealant, cleaned it up, and resealed. This is the second time I have done this; the first time was twenty or so years ago. Give it a shot, its not that hard.|
|07-26-2012 12:06 AM|
|BruceF||Sorry to hear about that. It wouldn't really be hard to fix.|
|07-25-2012 11:47 PM|
Where to begin? I knew this was not going to be easy or go smoothly. So UPS delivers my tank. It's never a good sign to hear things "moving" against a slate bottom when the package arrives, so I knew there was damage. Sure enough, once I got all the packing material out and so on, both side glasses were shattered. Oddly, the box and packing material were both in place. I suppose it shifted in transit and boom . . . there went my 20 gallon.
The seller has another, but I'm not taking my chances. I spoke with 2 guys at the fish shop today and one is willing to "have a look at it". I am not the least bit mechanically inclined and nothing I use sillicone on ever ends up water tight. So it's back to square one. I'm so disappointed.
If somebody's gotta a pal in L'ville with some watertight Metaframes (20 gall and above) let me know . . . and save me the time, effort and money of trying to "fix" the one I got!
|07-23-2012 06:36 PM|
If you are interested, I have some vintage metaframe airstones that have never been opened. Looks exactly like this pic I found on the web:
|07-23-2012 05:17 PM|
Originally Posted by reddhawkk View Post
What you need to get for filtration is an old Metaframe Dynaflow filter. Before Living World took them over.
|07-23-2012 04:51 PM|
|reddhawkk||I love the old Metaframe tanks. I have three running now, a 2.5 gallon, a 5 gallon and a 15 gallon long. No scuba divers though, just plants and fish.|
|07-21-2012 06:35 PM|
Tank arrives Monday. I've nixed the idea of G. ternetzi, due to size & lack of strong color. I'm leaning toward Black Ruby Barbs instead.
I'm still open for ideas on scaping, though the majority of images I find of tanks from this era include the use of sand and/or tiny gravel. I'll probably have to use a substrate below that for the plants. Those images I referenced usually show naturally colored substrate, round "river" rocks and a seemingly flat surface to the substrate,not a lot of height from ornaments or aquascaping. However, if anyone's got a good photo of retro aquascaping, I'll happily look over it for ideas.
|This thread has more than 15 replies. Click here to review the whole thread.|