|08-03-2012 03:50 PM|
|The Big Buddha||I run the 12V model running 12V PC fans for cooling and love it- I just ordered a another one. It's a nice digital temp monitor as well.|
|07-09-2012 07:26 PM|
|PlantedRich||You are correct in that limit. I had not thought of it as being anything that I would want/need to have both plugged in at the same time. I think of cooling as being a different season than heating, so to unplug one and plug in the other would not be a bother. Right now, I have both my heaters all disconnected to avoid heater failures killing any fish. If one does not use any type of heating or air and the outside temperature varies enough to need both, it would be a problem.|
|07-09-2012 04:34 PM|
|idex||Yes, just be aware that the F controllers are single stage... meaning they won't work for heating and cooling. Shouldn't be an issue if you're just using it for one or the other like I currently am.|
|07-09-2012 03:22 PM|
|PlantedRich||For the Fahrenheit, it takes a bit more looking but i found one yesterday. It was at or near the came price but shipping indicates a bit longer as it had to come from Hong Kong. Whether that is actual fact is undetermined. I would have a hard time thinking they would ship them singles rather than a large box and then break it into singles in this country. The odds of selling Fahrenheit to Asia seems long as compared to the US market.|
|07-09-2012 02:41 AM|
The box can be mounted. I just drilled some holes into the project box and then mounted it directly to my stand (Two holes on the side).
Oh, and good eyes on the conversion chart .
|07-09-2012 01:01 AM|
|tanks4allthefish||I didnt think about taping the conversion chart to the box. Thats a good idea. So are you going to be able to mount the box or will it just sit?|
|07-08-2012 11:07 PM|
|idex||I already had a spare power cable, outlet and outlet cover, but if you bought everything new you're looking at $40-$50 total. I used the wire from the power cable (just cut about a foot off and used that wire for the internals. The wire nut is probably a few cents (I bought a package of 25 for $2 at home depot. Outlets are about $2 and Covers are about $1.|
|07-08-2012 10:58 AM|
I had looked at the one the OP had but due to the space I had to work with and the fact I wanted it in F the ranco was the best fit. Also this thing is so accurate it isn't funny as you can control the temp spread for it coming on and off.
Here is the best picture I could find:
Now back to the OP topic.
Looks great just curious what you have in it total cost for everything with unit, box, cable, outlet, etc...
|07-08-2012 03:31 AM|
|07-08-2012 12:28 AM|
|sketch804||great idea here! I would love to build one of these if I could find some time.|
|07-07-2012 10:54 PM|
I use a Ranco Temp controller and if you aren't against a few wire nuts and stripping a bit of wire the bare unit works really well.
|07-07-2012 09:17 PM|
|tanks4allthefish||I have seen these and I like them and they are very reasonable but I just cant get past the whole Celsius thing. Why cant anyone offer these in Fahrenheit? If I could find one in Fahrenheit I would get one.|
|07-07-2012 06:28 PM|
I built my second one yesterday. I use this to monitor my tank temp and turn on my fans when it gets too warm. The fans will turn off when the tank has cooled sufficiently.
This is the box I used. (About $7 at radio shack)
I used a dremmel to make the cut outs for the outlet and the microcontroller.
This is the controller (purchased on ebay) (~25)
Besides wire and a plug you'll need these (I just used a spare computer power cable):
Use this schematic (I skipped the heater connection and did not break the tabs on the outlet (so i ended up with 2 plugs for cooling). I used 4 (~5 inch) wires for my box and used 1 wire nut. If you wanted to hook up the heating side you would need two more wires.
This is the source of the schematic and more info on other people's builds.
Here's the front (note: it is in Celsius)
Here is the back