|Topic Review (Newest First)|
|06-15-2015 12:20 PM|
Originally Posted by GadgetGirl View Post
You can make one the size of the top or one the size of your light..
Attaching it to the light is nothing more than strapping it to it..
Strapping it on the light face (or slightly suspended below, and made oversize to compensate for the light spread) would probably be preferable from a maintenance standpoint, unless you are doing open top and can use the screen as a top.
More depends on aesthetics and how hot your light is...
|06-15-2015 11:18 AM|
Originally Posted by nate2005 View Post
Reviving an old thread. I'm curious about this too.
|06-26-2013 01:52 AM|
How has everyone attached it or are you just placing it on the aquarium glass top?
Sent from my SCH-R530U using Tapatalk 4 Beta
|06-24-2013 10:52 PM|
|rcs0926||I'm going to try using one layer of screening and see how that works out. If the lights need to be dimmed even more, then I'll add another layer or two.|
|06-24-2013 10:44 PM|
Originally Posted by Hoppy View Post
|12-07-2012 05:57 AM|
I have an AquaticLife 36" T5HO with one 6500k bulb and one Roseate bulb, I'm using 3 layers of the gray screen over my 12g Long. I'm only using the stock legs that came with the light to elevate it above the tank, so at it's highest point, the light is about 14" above the substrate, and at the lowest, about 8".
The tank has only been filled for one week, but so far so good. I'm debating on removing one layer of the screen. My photoperiod is 6.5 hours right now.
|12-07-2012 01:24 AM|
Nope, no bars.
What does your fixture look like when you place it over your tank while using the screening? Still get the bars?
|12-06-2012 08:15 PM|
Originally Posted by somewhatshocked View Post
|12-06-2012 01:02 PM|
|somewhatshocked||I've been using black screening with Finnex fixtures and it works well. Takes 2-3 layers to accomplish what a single layer can do with a regular bulb-type fixture, though.|
|12-06-2012 05:20 AM|
|Hoppy||It looks like you are getting a diffraction effect that makes those bars of light show up. I haven't tried the screen with a LED light, so it may not work the same way. All I know is how it works with fluorescent lights. But, when you start shining light from near point sources through any form of "grating" you can get unexpected results (unexpected only to a non-physicist).|
|12-06-2012 04:24 AM|
Hi guys, I found this thread so I just continue here...
Something is odd about the spectrum of my Finnex 36" LED light using the window screen. And I just notice I bought the grey instead of black screen. Do you guys think its because I'm using grey screen the light spectrum went out of wack like this?
Two screen on
Two screen off
The same thing happened when I only use 1 screen.
|08-14-2011 10:55 AM|
|barbarossa4122||I am so pleased I bought the window screen the other day, thanks to Hoppy. And, according to him I reduced my lights about 30 to 40%. My 55g is looking a little dimer now but, who cares. Btw, I use 2 54w Geisseman on this tank, about 10" from top of tank.|
|08-14-2011 09:28 AM|
One benefit that I use the window screen for is to shade part of my tank from the High light that some of my plant like / need and give my low light fish a place to hide from it.
|08-14-2011 12:47 AM|
There are some times that lower PAR can appear "brighter" to our eyes than some "higher" PAR situations, but it's never comparing apples to apples and there are always intervening variables that make a mess of trying to predict it.
My 11g and 45g are both LED lit but using very different LED combos and driven at different drive currents.
The 11g has a PAR of about 30 on the sandbed and it appears quite bright to my eyes. Yet my 45g, which also has around 30 on the sandbed, looks pitifully dim.
I'm not entirely sure of why this is. If I crank the LEDs up on the 45g such that it looks bright to my eyes, I get algae hell.
I'm not sure how "green" registers on a PAR meter, but our eyes are way more sensitive to green light than plants are, so a green light that's ludicrously bright to us may not be all that useful to a plant. You'd think that this means "lower PAR" on lights high in the green area, but this is just a guess.
|08-14-2011 12:24 AM|
Without a doubt, you are seeing an optical illusion or perceived difference that is not reality.
The light comparison you mention is the point that PC lights are low efficiency, nothing to do with brightness. What it means is that T5HO has more output per wattage. And by more output, "brightness" would be par. It is not that it somehow is brighter but has less usable light.
To further understand, compare incandescent lights. 100 watts of incandescent is even less efficient than PC or T8.
The reason your PC lights had less algae is simple. Less efficient bulbs and reflectors.
too much light, too little co2, and too little ferts are the cause of algae, 99.5% of the time. Once algae is established ina particular time, the time it takes to eradicate it can be very long.
|This thread has more than 15 replies. Click here to review the whole thread.|