|04-26-2015 03:43 PM|
|Hilde||I bought a Swagelok B-1VS4. Anybody using it? Pros, Cons?|
|04-23-2015 07:10 PM|
|04-23-2015 06:06 PM|
|Mathman||I've got plenty of white cords. Went with black and white in case I ever need to deferentiate|
|04-23-2015 05:27 PM|
|04-23-2015 04:23 PM|
What's up folks! It's been awhile since I've posted any of my units. Anyways, enjoy...
|04-23-2015 04:16 PM|
|04-23-2015 04:02 PM|
|oldpunk78||Less bubble action per movement of the handle.|
|04-23-2015 03:57 PM|
Read at a thread that a needle valve 1300 series a 1 degree needle is better than a 3 degree needle.
What does this mean?
|03-23-2015 12:08 AM|
|03-22-2015 07:29 PM|
B = Brass
(The parentheses are telling you it will be SS or B)
20 = the model (not sure what the R denotes)
* = Connection style/size. The asterisk will be a combination of a letter and a number.
S- tube fitting
F- female connection
A number will follow the S or F. It denotes the size of the connection.
The only ones that really concern us are:
So for instance, SS-21RS4 would be a stainless 21 series with a 1/4" tube connection. B-31RF2 would be a brass 31 series with a 1/8" female connection. Keep in mind that is only the breakdown for that type of part number.
|03-22-2015 06:21 PM|
Making sense of the numbers:
Small Cv = This tells you the rate of flow for the valve....
Small Orifice = The size of the hole that the media flows through....
Handle turns = The amount of turns the valve has....
*The handle itself* = Easier to turn, torque, turn counter
No worries Hilde, we all have to start somewhere.
|03-20-2015 11:58 PM|
|03-20-2015 03:24 PM|
A Fabco is good enough w/out getting too fancy.
Hoke 1300's are rated at 3000psi brass 5000psi stainless steel
|03-20-2015 05:19 AM|
A hint is that the needle valve can work at 6000 PSI, which would indicate that it is not really precise enough for our purposes. Also, 6000 PSI seems to be ridiculous; are you sure it was not 60 PSI?
|03-19-2015 11:46 PM|
|Hilde||Would this needle valve by|
|This thread has more than 15 replies. Click here to review the whole thread.|