|06-20-2015 01:08 PM|
I use the out valve to adjust flow.
I didn't realize the quick release was a shut off valve until later.
|06-20-2015 12:10 PM|
|Oso Polar||Is it possible to adjust the flow on these filters if it'll be too much?|
|06-19-2015 10:22 PM|
Sent from my Nexus 6 using Tapatalk
|06-19-2015 06:56 PM|
What will be a good model for 50 gallon tank? 303A/303B or 304A/304B? Does somebody know what is the difference between 30x and 40x models, e.g. 303A and 403A? Description seems to be the same, so is it only color - white vs gray?!
Is UV usefull or A models (without UV lamp) will be a better choice?
|03-31-2015 06:24 PM|
Mine after 5 days working
Only good things to say
Never had such a cristal clear water. Even with the JBL.
The flow is good.
Not so silent as rhe JBL
|03-30-2015 11:40 PM|
|wootlaws||Mines (Aquatop CF400UV) running strong and quiet after 2 years of 24/7 use. My prime button has gotten really hard to push as it will stay depressed after pushed probably needs to be lubricated and I don't clean my filter as religiously as some people maybe 6 months - 1 year at a time.|
|03-30-2015 08:53 PM|
Is it normal the 302 piece of plastic on the out pipe?
A piece of white plastic (looks like a pre historic non return vale )
|03-27-2015 07:39 PM|
just received mine yesterday
de JBLe700 goes to a smaller tank
de diferences are nigth and day
the plastics are fragile but with some care it should be fine i hope
all the media from the 3 trays on the jbl only fill one and half trays on the sunsun!
this thing is huge
first prime was mouth to straberry water directly on the intake blarrrrg
the good news is that after 10 hours working the water is crystal clear much better than with the JBL !!
during the wekend will post some more of this fragile but cheap and powerfull canister
sorry my english but not a fan of google translator
|02-15-2015 01:54 PM|
Just bought the sunsun 302 pro kit, can I put the trays back in wrong? I'm seeing sand come out the out take sometimes when a Cory is over by it. Wondering if the filter trays go in a certain way, I have the holes lined up all the way to the lid. Can I have them turned wrong?
|06-08-2014 01:08 AM|
|jedimasterben||I've had the HW-302 sitting unused since the tank I was going to be setting up didn't happen, and the current one is too small to use it effectively IMHO (especially with guppies), but now I've got another tank to put in its place that I'm gonna use it on, looking forward to it. I've been using the canister just as a mechanical filter every once in a while in my reef.|
|06-07-2014 10:19 PM|
I am always a big fan of Eheim filters until finally tried Sunsun HW-402B 4-stage, today for my new tank.
Still too early to tell but initial setup goes very well. This filter is powerful and quite. Its a big filter with UV sterilizer for just less than $65 shipped.
|04-14-2014 11:47 PM|
|DennisS||I have a 10 gal fresh. Do I need something to provide oxygen if I have the SunSun? I currently have just a Filter wheel.|
|04-03-2014 01:23 AM|
Ohh. Yea sowNreap I measured the gph empty nothing.in the filter.
Sent from my LG-D500 using Tapatalk
|04-03-2014 12:56 AM|
|sowNreap||I bought my 304a from an ebay seller with no problems. Been running it for about 1 year. Never measured the actual GPH (which would depend on how you stuff the canister). I did notice if I used all the pieces to make the longest spraybar possible the flow seemed to decrease quite a bit. I took off just 1 section & it made a big difference.|
|04-02-2014 05:33 PM|
|green18||I actually think the uv was a good option for me. I run it maybe once a month for half a day and feel I gain a little water clarity. I actually wanted low gph as I am filtering a 27 cube. I plan on purchasing another for supplemental filtering on my big tank.|
|This thread has more than 15 replies. Click here to review the whole thread.|