|Yesterday 08:40 AM|
|Yesterday 12:42 AM|
I decided to go with the Catalina 50w. I'm very happy with it so far.
Sent from my SCH-I535 using Tapatalk
|12-09-2013 07:52 PM|
I am going through the same process at the moment and was wondering if anyone has tried the Archaea heater.
Does it fit in the filter?
|08-02-2013 05:42 PM|
Anyone have experience with this Citii heater? It's a circular shape and only 3 inches round. Sold on ebay as well.
|05-23-2013 09:40 PM|
Not everybody will care, though.
|05-22-2013 04:06 AM|
|Icarus5||Thanks VJM. It looks like the Archaea heater is the only one that will fit in the HOB if I intend to do the same mod that Tuonor did. The Archaea is 1/2" longer than the one that Tuonor used...will it still work? Does anyone else have experience using the Archaea in this way?|
|05-20-2013 09:11 PM|
These 2 heaters are a bit flatter than normal and fit nicely into tight spaces. I have seen the second one but havent used it. The first on ( aqueon ) I use in my 2g spec. It keeps temp pretty warm ( sometimes too warm )
|05-20-2013 11:58 AM|
The Archaea heater is very, very close to this size, and does not need a transformer.
Only negative is that the suction cups suck.
|05-20-2013 08:50 AM|
|Icarus5||Does anyone know where to source the up aqua mini heater? I can' t seem to find it on Ebay, or anywhere else for that matter.|
|01-04-2013 03:11 PM|
i WISH i saw this earlier... I'm subscribing...
as far as purgen goes I bought the 'bag' and used my surger to make smaller bags...
made 3 small bags for my azoo palm and one for my finnex p-360
Untitled by laq997, on Flickr
(used 1 bag, and one container of purgen .. lots of purgen left)
|01-04-2013 02:37 PM|
After spending literally hours looking for the perfect heater for my Fluval Edge. I've bumped into this thread. Genius!
I know it's an old thread, but this has given time for the OP and other people to now have a definitive opinion on the mentioned Hong Kong compact heater, and the technique of mounting it within the HOB filter.
How are people getting on with this? Is it working out OK?
My tank has finally completed the nitrogen cycle and I'm dying to get stocking. But my heater isn't working now, so I need a replacement!
|01-08-2012 07:44 AM|
Maybe a sewing machine will work?
I did that to seal a media bag I used for purigen.
It was too large so I had to cut it into 2 and resealed it back up.
|01-08-2012 07:12 AM|
|12-27-2011 11:23 PM|
|AquaDean||I use the Boyds Chemi Bag, works great for Purigen is far more flexible than the Seachem bags and can be sealed with a small zip-tie and used over and over again. Also can be cut to size to fit the smaller HOB filters.|
|12-27-2011 08:54 PM|
|This thread has more than 15 replies. Click here to review the whole thread.|