|01-07-2013 04:50 PM|
Hello everyone, and thanks again for all the advice and replies. A little bird told me to keep an eye out after Christmas for the 1$ per gallon sale, and sure enough December 28th I went in and bought myself a brand new 29 Gallon marked for $29 with a 25% off cupon, needless to say it was a great deal.
However, I also went ahead and took a gamble with my 30 Gallon. I put very thick beads along the cracklines themselves, removed and replaced the silicone on all edges, heavily siliconed the sides of a 10 gallon tank to the top and bottom of the tank on and around the crack area, and then cut some insulation foam to the proper size and placed it along the entire underside of the tank. I was very nervous while filling the tank with substrate and the hardscape, but here I am a few weeks later and the tank has been up and running just fine, I've been keeping an eye on the cracks and marked them initially with pieces of tape and a marker (obviously externally) and also took pictures, and none of them have spread or gotten any bigger. I know I was takin a big risk but it seems to have worked great and my girlfriend loves the tank. I'll post pictures soon but I just wanted to let everyone know that as of right now, the repairs worked very well.
I know it's not ideal, but if anyone finds themselves in a similar situation and cannot afford to replace the entire tank I think if done properly this is a viable option (While still extremely risky)
*Edited for spelling*
|12-26-2012 08:08 PM|
|email@example.com||Which of the "go ahead and patch it" people are willing to accept liability for their suggestions?|
|12-25-2012 03:01 PM|
Petco says no to 30G tank in the dpg sale.
and they charge tax for the full retail so for about $30 @ a dpg sale you are limited to 20 gallons.
since the OP has most of the materials, and if its done right & tested .it should work out.
|12-25-2012 10:14 AM|
|hydrophyte||It is generally much wiser to just purchase a new tank. Thirty gallons of water can do a lot of expensive damage.|
|12-25-2012 06:46 AM|
|boxhead1990||It would be the same as putting a patch over where a tank has been drilled just make sure there's no air pockets and it will be fine chances are the crack doesn't leak anyways|
|12-24-2012 11:25 AM|
|12-21-2012 09:14 PM|
|JoeGREEEN||K' goodluck and keep us posted|
|12-21-2012 08:51 PM|
Thank you all for the replies and great info, it's much appreciated. Luckily I have plenty of that insulation foam board stuff on hand in various thicknesses so I'll see which fits the best and go from there. I'll keep you all posted if anyone is interested to hear the results. :]
Also R.Sok, I've looked locally online and in classifieds but apparently aquariums aren't popular around here, cause' I've found NOTHING. Lots of great stuff on AquaBid but not in my state and local pickup only lol
|12-21-2012 08:44 PM|
This method has been done on bottom glass but not by me. (only back and side)
If your friend is desperate for a quick fix then use the glass you got from the 10G & make sure its siliconed inside of the tank and a good bead along each crack and use that plush pink foam cut to the inner perimiter of the bottom frame and place it below the tank.
and even with all this I would stress test it outside after it dries over newspaper for 72hrs , just to make sure.
|12-21-2012 08:29 PM|
My friend has done it before with a 10gallon running for a year with no disasters. he used the pink foam from homedepot, I forgot what thickness but it was slightly thicker than flush, with water poured in it leveled itself out & acted as a support.
Again do this at your own risk & keep in mind even though the crack is only 2 1/2 inches it will spread over time. Idk how much used 30 gallon tanks go for in your area but around here they can be had 15-50 used..sometimes even free which is far better than the risk
|12-21-2012 08:21 PM|
Joe, have you ever used that method for bottom cracks? It's a very small crack (maybe 2 1/2 inches) and the tank held water with the crack there, I just wanted to try and do what I could to help it not get worse. I'll keep you all informed so you can either say wow it worked or have a good laugh and see pictures of my friends ruined carpet XD
Thank god my tanks are all okay >_>
|12-21-2012 08:13 PM|
It can be done
Ive patched side cracks before with no problem
I think if you use a piece of at least 1/8" thick glass and patch it on the inside of the tank and then place a piece of foam (like the pink foam & NOT styrofoam) on the inner bottom you should be fine.
I would go to a local glass shop and have them custom size a glass pane the size of the inside of the bottom and just silicone that on the cracked bottom.
Just be sure to use aquarium safe silicone (Silicone 1 by GE ) and put a good bead along all the cracks.
|12-21-2012 08:12 PM|
|Wy Renegade||I hate to say it, because I also view it as a disaster just waiting to happen, but I do know some people who did it with a 125 gallon. Two pieces of glass, one above and one below, and lots of aquarium silicon and it has been up and running with a full reef in it for five years now without issue. It is most definitely not something I would do however.|
|12-21-2012 08:06 PM|
|Revonok||Have you ever attempted it or know anyone who has? I'm by no means arguing your point, I'm hesitant to try myself honestly lol I've just seen a few people saying they've done this with success.|
|12-21-2012 08:01 PM|
If you can't replace the entire pane of glass, then don't bother patching it, it is just a waste of time and materials, in my opinion.
It is also extremely risky, as the aquarium would not be any safer to use...
|This thread has more than 15 replies. Click here to review the whole thread.|