|08-02-2012 04:32 PM|
OK, I will look for an epoxy type of sealer. Thanks!
Yes, something softer for the tube to land on. Maybe just the soil.
|08-02-2012 02:15 PM|
|xenxes||In that case, regardless of the material you're using, you can pad the ground portion with some foam to avoid the loud thunk.|
|08-02-2012 02:03 PM|
|mistergreen||Anything epoxy based should be fish friendly. Once it cures, it's inert.|
|08-02-2012 01:55 PM|
I am not actually trying to scare the deer.
In fact, I do not really want a loud thunk at all. The active tipping and the sound of water are more important.
This will be near a pond, and I could arrange it so it is all above the pond, so any spills or leaks flow back to the pond. The pond has fish, so any clear sealer would have to be fish-safe.
|08-01-2012 08:45 PM|
It should be ok if it leaks a little as long as the leaked water return to the same source.
|08-01-2012 06:43 PM|
One thing about PVC though, I don't know if plastic on plastic will give that same "thud" as bamboo. Give it a try and see tho!
Are you actually doing this to scare deer lol? Or just for aesthetics.
|08-01-2012 04:07 PM|
Thanks xenxes, I have seen the squidoo item. Seems the construction is easy enough.
Thanks, mistergreen, but I already have the bamboo. Sure is a good idea about the PVC, though. No worries about it leaking! A little creative painting and it would look like bamboo, too.
|08-01-2012 03:31 PM|
|mistergreen||you can make it out of pvc tubes and paint it for durability.|
|08-01-2012 03:28 PM|
|08-01-2012 02:24 PM|
Bamboo Deer Scare
I am going to make one.
I want to know how long they last, and what can be done to make them last longer.
Does it help to seal the inside? With what?
If it does not land so sharply on the rock, but has a gentler touch down will that help? (I do not need the loud 'CLUNK!' sound, a gentle 'Tap' is plenty)
How secure does it have to be in the ground? Concrete? Or is compacted dirt enough?
If it is all built in one piece, secured to a plate that is buried, will that be more secure?
I am thinking of the H shaped one, with the water supply supported by the same legs as the rocking piece.
Any other tips?