|09-11-2011 06:36 AM|
|oldbonehead||Nice. Reminds me of a forest's edge.|
|09-10-2011 03:15 AM|
|VadimShevchuk||Beautiful tank! im planning on grabbing a 75-p in the spring. You probably wish you didnt use sand with aquasoil i assume as it got mixed up.|
|09-10-2011 02:56 AM|
|2in10||Very nice, changes look good, looks as though the hair grass took over your avenue.|
|09-10-2011 02:49 AM|
Update on the tank:
Comments and suggestions are welcome.
|07-26-2011 11:49 PM|
|07-26-2011 02:43 AM|
Got some pictures.... First is just setting the tank up...
next one is a picture of the stand and light:
The last two are pictures taken about 2 weeks later:
|06-30-2011 02:22 PM|
Looking good, i like your choice of foreground cover. I have baby tear in mine as well you can see it here: http://www.plantedtank.net/forums/ta...h-journal.html
It grows great and very fast, stays healthy with good light and imo is nice eye candy Cant wait to see updates!
|06-30-2011 04:10 AM|
I do not have plans, but I could give you the measurements. I started by making the top (where the tank sits) very slightly bigger than the tank. In order to determine the stand height, I customized the height to allow me to comfortably reach into the tank (this is taken by measuring from your armpit down to the floor, minus the tank height). I also had to account for the leveling feet I added to the tank.
I need to find the charger to my camera, so that I can take more pictures and post a longer explanation.....
Ok, about the formica. Well, lots of things to learn. Easy as hell to apply, so long as you got the right tools. Get a good router (I like Bosch) and router trimming bits (also Bosch). Then get a fine tooth circular saw to cut the sheets of formica. Last, you need the glue (contact cement) and dowels (I used paint sticks). Presto. You can also file the edges (although I only needed to do that for a few places).
Okay, the other thing--lay small formica pieces (trim) and then do the larger pieces (sides, etc...). It's super simple. You can watch lots of Youtube videos. But there's no substitute for actually working with the router and formica. You need to get a feel for that. If you are worried, just buy a couple square feet and make a small project with formica. You'll see it's pretty simple.
Formica solves one of the hardest things for amateurs: finishing work. Good finishing work is what separates the real craftsmen from the amateurs. Try it. You will be amazed.
|06-30-2011 03:50 AM|
|Jeffww||Do you have plans for how to construct that stand? How hard was laminating the wood?|
|06-30-2011 03:48 AM|
Ok, here are some of my ideas for plants.
First, the focal point (where the two threads intersect). I'm looking at ONE of the following reddish plants (copy the name into google search for pictures):
Focal point plant (Background):
Ludwigia Peruensis (Ludwigia peruensis aka Ludwigia glandulosa)
Limnophila hippuroides (Limnophila aromatica 'hippuroides')
Pogostemon helferi (Hellfire) - mixed with
Hemianthus callitrichoides (Baby tears)
Not sure about middle ground and the other background plants....
I am also looking at:
Echinodorus Angustifolia 'Vesuvius'
|06-29-2011 11:52 PM|
|shrimpnmoss||Hey sweet looking tank. Looking forward what you're going to do with it.|
|06-29-2011 11:12 PM|
|marqese||sweet what ya gonna put in there?|
|06-29-2011 10:59 PM|
Those pictures do not reflect that fact that I have raised the light to around 18" from the top of the tank (similar to Amano's tanks).
Your comments and suggestions are welcome.
|06-29-2011 10:57 PM|
|01-25-2011 05:12 AM|
ngfrazier's ADA 75-P Tank Journal
Got my new ADA 75-P from ADGshop in Houston
Looking to build a "Nature style" tank. So far, no plants or fish
My equipment List (as of 1/24/11):
Tank: ADA 75-P (with 2 bags of Aquasoil original plus 50lbs of sand)
Light: 150 watt Aqualine HQI bulb
Pendant: ReefOptix III
Ballast: Sunlight Supply Galaxy Electronic 150w HQI
CO2: 10lb aluminum tank
Regulator: Victor Model VTS253A-1993 (dual stage + dual gauge)
Needle Valve: ....Swagelok 21 series Stainless Steel Metering Valve
CO2 injector: Mazzei 584C
Filter A: Eheim 2217
Filter B: Eheim 2215
Heater: ETH Hydor 300 watt external
UV: Some random UK company 25 watt marine uv steralizer
Stand: DIY "ADA" style (Google Jason Baliban for a good guide)
My ADA-style stand is complete. Because my house is old and the floor is NOT level I had to add "leveling feet" to the stand. The leveling feet are made in Germany and each can support 800+ pounds! They seem to do a fantastic job (much better than shims, imo).
The last pic is of the pad which will cushion the tank. ADA charges $30.00 for what is essentially a yoga pad. My solution? Marshalls (a discount retailer) for $12.00!
Anyways, will update with pics. Your thoughts and comments are always welcome!