kevmo911 kevmo911 is offline
- Total Messages: 6
- Most Recent Message: 12-20-2012 10:58 PM
- Visitor Messages for kevmo911
- Last Activity: Yesterday 07:01 PM
- Join Date: 09-24-2010
- Referrals: 0
|10:22 PM - Immortal1 mentioned kevmo911 in post Matrix without Seachem
...metering valve from kevmo911 on a RAOK. His only ...
|03:41 PM - Axelrodi202 mentioned kevmo911 in post Ista CO2 Regulator
kevmo911 is absolutely correc...
|07:15 AM - Seattle_Aquarist mentioned kevmo911 in post Substrate Choices Pros/Cons
... really curious. kevmo911 It could certainly ...
|09:11 PM - thedood mentioned kevmo911 in post CO2 from air... hear me out.
kevmo911 Do you think that le...
|10:17 PM - dazed&confused mentioned kevmo911 in post DIY CO2 Setup - Matheson, Where Does The CO2 Go
...h the regulator. kevmo911 - Thank you for the ...
|03:05 PM - bassbuster23 mentioned kevmo911 in post I think I'm seeing things......
...ly, have you? ;) kevmo911....I'm drug free, bu...
|11:16 PM - Marty.h mentioned kevmo911 in post Water changes can kill your fish from ammonia spikes.
...high as 50ppm kevmo911 Only reason I would...
|04:51 PM - bassbuster23 mentioned kevmo911 in post co2 is up & running - here come the questions
...u describe on yours kevmo911.
|10:52 AM - Burito mentioned kevmo911 in post Solenoid warming up co2?
...er 1-2 seconds). kevmo911 My bubble counter l...
|01:36 PM - bassbuster23 mentioned kevmo911 in post gH & kH
kevmo911....glad to know I fa...
|03:24 PM - Moonshayde mentioned kevmo911 in post Which Swagelok Needle valve?
... extra $10 or so. @kevmo911 - I did see the Fabc...
|05:29 AM - Sennithgrey mentioned kevmo911 in post Advice for a new 90 gal tank
... that MTS will? kevmo911: At the moment, the...
|09:47 PM - bassbuster23 mentioned kevmo911 in post Bubble Counter for DIY co2
... Thanks Devinh and kevmo911!! I never would have...
|01:48 PM - Akaliman mentioned kevmo911 in post co2 diffusion question
...algae free tank. kevmo911 why can't I use tank...
|11:09 PM - piggy82 mentioned kevmo911 in post Is this normal for a CO2 regulator?
... if I was wrong. kevmo911 the LP gauge on 315...
|08:25 AM - dukydaf mentioned kevmo911 in post BBA some exploratory experiments
...hanks for the link kevmo911 , it was an interest...
|04:52 AM - jeffkrol quoted kevmo911 in post Connecting solenoid to regulator
Unfortunately, you won't be a...
|03:56 AM - Pmasa quoted kevmo911 in post Connecting solenoid to regulator
Unfortunately, you won't be a...
|12:49 AM - Hilde quoted kevmo911 in post Paintball Co2 system questions
As far as needle valves go, t...
|10:57 PM - kevmo911 quoted Felipe in post Swagelok B-ORM2-A Valve?
Thanks Kevmo! I was worried...
|01:09 AM - Darkblade48 quoted kevmo911 in post Matheson
I know some older Harris mode...
|10:01 PM - kevmo911 quoted Darkblade48 in post Matheson
The nipple will need replacing. ...
|12:42 AM - jeffkrol quoted kevmo911 in post Hoke parts.
Hoke and Swagelok are going t...
|12:36 AM - Hilde quoted kevmo911 in post Paintball Co2 system questions
Now thinking of getting Clipp...
|11:07 PM - jeffkrol quoted kevmo911 in post Co2 Regulator Help
in the pictures you included ...
|09:01 AM - michu quoted kevmo911 in post Victor Help
In that case, assuming there'...
|10:05 AM - kevmo911 quoted Tran in post CO2 electric valve - addition of a second stage pressure regulator
Thanks, the hot temperat...
|12:08 AM - kevmo911 quoted PlantedRich in post Ground fault ?
Most houses will have a limited ...
|11:46 PM - kevmo911 quoted lksdrinker in post Ground fault ?
Thats not necessarily true. If...
|06:12 PM - lksdrinker quoted kevmo911 in post Ground fault ?
If it's on a 3-wire circuit (...
|10:50 PM - kevmo911 quoted jeffkrol in post Hard to remove fittings on co2 regulator
so about a 10% failure rate.....
|08:01 AM - kevmo911 quoted srikanth4455 in post Ista CO2 Regulator
thanks for all the responses. ...
|08:14 PM - jeffkrol quoted kevmo911 in post Hard to remove fittings on co2 regulator
I've had better luck with a p...
|07:21 AM - jeffkrol quoted kevmo911 in post Is it worth fixing this regulator
There's a regulator leak test...
|07:05 AM - LotusBunny quoted kevmo911 in post Having trouble finding fittings, please help!
Brass sleeve over the parts o...
|02:57 AM - Jaguar quoted kevmo911 in post GFCI Adapters (CA)
I've had this discussion befo...
|iTrader Profile||Recent Ratings|