ODNO measurements: power consumption vs light output(LONG)

[Freebird01]

with an ODNO setup can you still use the bulb sleeves or do the bulbs get too hot for them?

[shoppinit]

Hi all,

Will ODNO work with this kind of lamp:



As far as I can tell it's the same technology as the regular tubes, just with a 180° bend in it...

Thanks.

Ben.

[PAINKILLER1009]

Looks like compact florecent bulb to me. You can over drive them but they run very hot and you cant make them very much brighter. ODing is for t12-t8 really.

[SCMurphy]

PC bulbs are basically already on overdrive, it isn't worth the electricity to overdrive them more, the efficiency drops.

[milkdud]

What reflectors are you using for the t8's?

[shoppinit]

Thanks for that. I was hoping to be able to overdrive them, but I think I'll forget it now. I just needed a little more light output.

THanks.

Ben.

[SpeedEuphoria]

Thanks for the very awesome thread. Most of what I saw so far was the assumption that energy would be wasted. I'm moving forward now with my ODNO project.

I only wish that 2 bulbs were tested @ 2x ODNO to see it the ballast provided the 112watts? or less than 100w

[Basilisk]

I haven't overdriven yet. However, reading over and over this article, leaves me wondering what could be achieved ODing using several single bulb ballasts. I have 4 of them. Do you think that could overdrive actual 2x? I mean, actual 64 watts into one bulb with two ballasts?

I fear, without a solid basis, that two ballasts won't work in perfect sync, and cause some serious strike or shock.

[epicfish]

No, it's not possible.

[Basilisk]

Just as I thought.

[oceanus]

Originally Posted by shrimpy2

Hi All, my first post.

This is a great thread that got me working on my personal OD project, which I just completed.

This weekend, I retrofitted a similar setup and got some results that seem to back up the original findings in this thread.

The set up is:

1 - Advance REL-4P32-SC (4x32W)
3 - Philips T8 48" Daylight 6500K bulbs in the following configuration:
1st bulb - normal output (1 lead)
2nd bulb - normal output (1 lead)
3rd bulb - overdrive 2x (2 leads)

Due to way the hood is set up, the wiring is permanent, so I can only test according to the on/off combinations above by removing or adding bulbs.

Using the kill-a-watt device (which I love), I got the following wattage consumption measurements:

a) No bulbs installed: 5 watts
b) Only 1 NO bulb: 40 watts
c) Only the 2xOD bulb: 54 watts
d) Both NO bulbs: 66 watts
e) One NO and the 2xOD: 80 watts
f) All three bulbs: 102 watts

With all three bulbs on, the 2xOD bulb is noticibly brighter. Unfortuntely, I don't have any light measuring equipment, so that desciption is as scientific as it's gonna get. Thats a shame b/c while the 2xOD is brighter, I don't know if the 2xOD brighter b/c of pure additional lighting, or if it was somehow stealing something from the other bulbs and making them dimmer.

The ballast was plugged into the kill-a-watt device, which in turn was plugged directly into a wall socket.

Any comments, questions or suggestions?

Thanks

Switching into a electronic ballast rather than a noraml ballast will helps save at least 30% of the electricity consumption as well..