Preparing aquarium wood

swcurtis · 06-08-2009, 07:33 AM

Hello everyone I am new to the forum and was wondering if anyone knows how to prepare wood for an aquarium. I know that manzanita and oak can be used as aquarium wood but I am not sure how to prepare them. Do I just cut them fresh, or use dry but not rotten wood? Earlier today I cut some pieces of manzanita and oak that both fell over the winter so were pretty new and mostly unweathered. Does the bark need to be removed, does it need to be sandblasted, or do I just waterlog it and stick it in a tank. Any help would be appreciated!
-Sam

Darkblade48 · 06-08-2009, 03:56 PM

I'm not too sure about the process, as I have never picked my own driftwood, but the general procedure as I understand is that the bark will need to be removed. You will want to boil it in a large pot of water to ensure no hitch hikers are introduced to your aquarium.

CrowEater · 06-09-2009, 03:22 AM

There are lots of articles on DIY driftwood:

http://www.tetra-fish.com/forums/showthread.php?t=2268
http://www.cichlidforums.com/showthread.php?t=23083
http://ezinearticles.com/?DIY-Driftw...rium&id=182987
http://www.aquaticplantcentral.com/f...ood-issue.html

Even ones on this forum:

http://www.plantedtank.net/forums/di...afe-woods.html

I just completed my own driftwood project and I can honestly say I will never buy driftwood again. Finding the right piece to match your tank and cleaning and sanitizing it only costs time.

**Coltonorr** · 06-09-2009, 03:46 AM

Sam,
Welcome...

I would find dry would, if you cut it fresh, I think you would have to dry it out first...
I would start by making sure the bark is stripped off, clean it or brush it off with a stiff brush, boil it...

Quote:

Originally Posted by CrowEater

I just completed my own driftwood project and I can honestly say I will never buy driftwood again. Finding the right piece to match your tank and cleaning and sanitizing it only costs time.

Hi and Welcome!
Just to play devils advocate

...it takes time to make your own driftwood too...doesn't it?

got any pics?

swcurtis · 06-10-2009, 02:02 AM

Great, thanks everyone for the help I am excited to try this out!

**michu** · 06-10-2009, 04:08 AM

I gathered my own by walking down a dry lake and gathering pieces, cutting stumps of all sizes and shapes. I piled them in my flower bed and let the weather dry them out/remove the bark intending to sand blast them later. Two months of sun, snow, and rain did an excellent job. The bark easily peeled away from the pieces that had remaining bark. Most were too large to boil, but I did boil one of the pieces for 2 hours before putting into the tank. Those that weren't boiled grew some white fuzz for a few weeks before disappearing.

Frankly, I think buying wood for the tank is simply nuts when it can be readily found along any stream, creek, or river. The biggest job is hauling them in, then hauling off the remaining 90% unused pieces as i did. LOL

06-08-2009, 07:33 AM	#1 (permalink)
swcurtis Algae Grower (View User Tanks) PTrader: (0/0%) Join Date: Jun 2009 Location: Sacramento, CA Posts: 8	Preparing aquarium wood Hello everyone I am new to the forum and was wondering if anyone knows how to prepare wood for an aquarium. I know that manzanita and oak can be used as aquarium wood but I am not sure how to prepare them. Do I just cut them fresh, or use dry but not rotten wood? Earlier today I cut some pieces of manzanita and oak that both fell over the winter so were pretty new and mostly unweathered. Does the bark need to be removed, does it need to be sandblasted, or do I just waterlog it and stick it in a tank. Any help would be appreciated! -Sam

06-08-2009, 03:56 PM	#2 (permalink)
Darkblade48 Wannabe Guru (View User Tanks) PTrader: (1/100%) Join Date: Jan 2008 Location: Minakami, Gunma, Japan Posts: 1,247	I'm not too sure about the process, as I have never picked my own driftwood, but the general procedure as I understand is that the bark will need to be removed. You will want to boil it in a large pot of water to ensure no hitch hikers are introduced to your aquarium. __________________ Anthony Eheim Pimp #362 - Eheim 2213 x2, Eheim 2028, Eheim surface skimmer and Eheim autofeeder. Victor Pimp #33 - HPT272-125-350-4M

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-09-2009, 03:22 AM	#3 (permalink)
CrowEater Newbie (View User Tanks) PTrader: (0/0%) Join Date: Jun 2009 Location: Minneapolis, MN Posts: 1	There are lots of articles on DIY driftwood: http://www.tetra-fish.com/forums/showthread.php?t=2268 http://www.cichlidforums.com/showthread.php?t=23083 http://ezinearticles.com/?DIY-Driftw...rium&id=182987 http://www.aquaticplantcentral.com/f...ood-issue.html Even ones on this forum: http://www.plantedtank.net/forums/di...afe-woods.html I just completed my own driftwood project and I can honestly say I will never buy driftwood again. Finding the right piece to match your tank and cleaning and sanitizing it only costs time.

06-10-2009, 02:02 AM	#5 (permalink)
swcurtis Algae Grower (View User Tanks) PTrader: (0/0%) Join Date: Jun 2009 Location: Sacramento, CA Posts: 8	Great, thanks everyone for the help I am excited to try this out!

06-10-2009, 04:08 AM	#6 (permalink)
michu Victor Pimp last x + 1 (View User Tanks) PTrader: (9/100%) Join Date: Dec 2008 Location: Bristol, TN Posts: 281	I gathered my own by walking down a dry lake and gathering pieces, cutting stumps of all sizes and shapes. I piled them in my flower bed and let the weather dry them out/remove the bark intending to sand blast them later. Two months of sun, snow, and rain did an excellent job. The bark easily peeled away from the pieces that had remaining bark. Most were too large to boil, but I did boil one of the pieces for 2 hours before putting into the tank. Those that weren't boiled grew some white fuzz for a few weeks before disappearing. Frankly, I think buying wood for the tank is simply nuts when it can be readily found along any stream, creek, or river. The biggest job is hauling them in, then hauling off the remaining 90% unused pieces as i did. LOL

Advertisements
Get Rid of Advertisements