|
||||||||||||||||
|
||||||||||||||||
|
|||||||
| Advertisements | |
| Get Rid of Advertisements | |
|
|
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
Newbie
|
DIY Yeast CO2 with Red Sea 500 Reactor
Hello,
Will a Red Sea 500 Reactor work effectively with DIY Yeast CO2? I've heard that the Red Sea 500 relies on pressure from the CO2 in order to dissolve effectively in the water and that DIY yeast will not be able to produce the necessary amount of CO2 (pressure). If this is true, will using two or more 2 liter bottles produce the necessary pressure, instead of one? Thank you for your help. |
|
|
|
|
|
#2 (permalink) |
|
Algae Grower
|
I used that reactor with my DIY C02 and it worked great.
It does rely on pressure but the pressure from the 2L bottle is enough. (it doesn't need much) Only problem I had was that I found out after a went to pressurized C02 was that I had the reactor upside down for months. So my c02 from the DIY system could have been a lot higher than it was. |
|
|
|
|
|
#3 (permalink) |
|
Algae Grower
|
I have two redsea CO2 cannisters chained up to the 500 reactor. My tank size is a 40 gallon with a 70w HQI, probably not enough light and co2 at this point, but have spent too much this year on the tank.. Everything has been working GREAT! Every now and then a bunch of tiny, non-dissovable bubbles will spurt out and rise to the surface. It's nice to know this reactor will work with a pressurized system when I'm ready to drop a few more bills
|
|
|
|
|
|
#4 (permalink) | |
|
PlantedTank.Net Obsessed
|
Quote:
Thanks Ed
__________________
90 Gal - 2 Eheim 2217s - 4 Rio 50s - 4X96watts CF - Flourite - 2X300w Visitherm - Pressurized CO2
25 Gal - Eheim 2236 - 36 watt CF - 28 watt CF - Flourite - 150w EBO Jager - Red Sea 500 Reactor - Pressurized CO2 15 Gal - Eheim 2215 - 36 watt CF -18 watt CF - Flourite - 150w Visitherm - Pressurized CO2 - Nano Diffusor 03 Gal - Eclipse system - DIY CO2 |
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|