Help make single Azoo regulator double

dclaassen · 01-21-2008, 01:27 PM

I have the following Azoo regulator:

It is currently sitting in a stand under a planted 24g aquapod. I am thinking about also adding the co2 into a 150g extra high planted tank as well. This would require running about 25 or so feet of tubing....hope that isn't too long of a distance. Is there a simple and inexpensive way to double the output while still being able to control the flow of co2 independently? Thanks for the input,
Dan

**Vonzorfox** · 01-21-2008, 01:51 PM

You will need a manifold, another needle valve, brass check valve and co2 tubing. Other than the time it would take to fill the 25' run of hose it shouldn't be much of a problem providing you get quality tubing, don't go cheap. Contact either Orlando or Rex Grigg and they can hook you up with everything at a reasonable price.

**Rex Grigg** · 01-21-2008, 09:57 PM

Vonzorfox pretty much gave you the straight scoop.

01-21-2008, 01:27 PM	#1 (permalink)
dclaassen Algae Grower (View User Tanks) PTrader: (5) Join Date: Nov 2007 Location: Indianapolis, Indiana Posts: 51	Help make single Azoo regulator double I have the following Azoo regulator: It is currently sitting in a stand under a planted 24g aquapod. I am thinking about also adding the co2 into a 150g extra high planted tank as well. This would require running about 25 or so feet of tubing....hope that isn't too long of a distance. Is there a simple and inexpensive way to double the output while still being able to control the flow of co2 independently? Thanks for the input, Dan

01-21-2008, 09:57 PM	#3 (permalink)
Rex Grigg Curmudgeon and CO2 Guru (View User Tanks) PTrader: (65) Join Date: Dec 2002 Location: Portland Orygun Posts: 9,595	Vonzorfox pretty much gave you the straight scoop. __________________ The Original Custom CO2 Regulator Dry Ferts Link to my Guide Purveyor of the Brutal Truth In Heaven We Were Formed... In Hell We Were Trained... On Earth We Were Released... United States Marine Corps!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-21-2008, 01:51 PM	#2 (permalink)
Vonzorfox ____________________ (View User Tanks) PTrader: (12) Join Date: Nov 2007 Location: ---------------------------------- Posts: 363	You will need a manifold, another needle valve, brass check valve and co2 tubing. Other than the time it would take to fill the 25' run of hose it shouldn't be much of a problem providing you get quality tubing, don't go cheap. Contact either Orlando or Rex Grigg and they can hook you up with everything at a reasonable price.

Advertisements
Get Rid of Advertisements