View Single Post
Old 04-28-2008, 03:24 AM   #39 (permalink)
SeaSerpant
Wannabe Guru
 
SeaSerpant's Avatar
 
PTrader: (1)
Join Date: Feb 2008
Location: Edmonton, AB, Canada
Posts: 1,207
Default

Ok, first i put some painting plastic on the ground so if i splashed, it would go onto it, not the carpet.




Next i moved everything from under the 60g aquarium to my desk.




Once i did that i put towels on the ground to soak up most of the water.




I had 3 rubbermaid buckets and 2, 5g pails, to put the water from the aquarium in.




I drained all the water out into the rubbermaid buckets.




I put all the fish in one rubbermaid bucket with the decor, plants, heater, light and filter (canister).




I drained all of the 60g asides from a bit of water and the gravel for the 120g. then my dad and my brother put it on the floor.





I took all the gravel from the 60g and put it in the 120g, added some water, and put some towels on top to keep the debree from flying everywhere.




I started to fill the 120g, and then i put the heater in the aquarium and the fish in the bucket into the aquarium.





Filled it up some more and put a towel on the side to keep it from dripping.




I took everything out and put the lights and fish in and whoola the final product.





I have the problem of not enough substrate, so i can't hold the plants in properly. but i will have enough when i slowly buy the substrate and switch it over. that will cost about 250$ canadian.





This took me over 4h to complete and now i'm pooped and so are the fish.
__________________
Thanks
SeaSerpant


__________________________




SeaSerpant is offline   Reply With Quote