The Planted Tank Forum - View Single Post

**BiscuitSlayer** · 03-09-2008, 03:06 AM

If you need any help, feel free to PM me.

Everything should be streight forward for you. The hardest thing would probably be determining your bubble rate. It's best to start low and work your way up.

Here is a good calculator to help determine your CO2 in parts per million (ppm):

http://www.csd.net/~cgadd/aqua/art_plant_co2chart.htm

I would check the parameters about 1/2 way through your photoperiod and then at the end of your photo period. Then just adjust the bubble rate the next day. After 2 to 4 days, you should have a handle on everything.

03-09-2008, 03:06 AM	#2 (permalink)
BiscuitSlayer Eatus Morus Biscuitus (View User Tanks) PTrader: (7) Join Date: Apr 2005 Location: Acworth, GA Posts: 2,138	If you need any help, feel free to PM me. Everything should be streight forward for you. The hardest thing would probably be determining your bubble rate. It's best to start low and work your way up. Here is a good calculator to help determine your CO2 in parts per million (ppm): http://www.csd.net/~cgadd/aqua/art_plant_co2chart.htm I would check the parameters about 1/2 way through your photoperiod and then at the end of your photo period. Then just adjust the bubble rate the next day. After 2 to 4 days, you should have a handle on everything. __________________ Filstar Pimp #106 29 Gallon Journal - XP2, 130W Coralife Fixture (10,000K and 6700K), Pressurized CO2, DIY Reactor, EI dosing Stand and Canopy Build Journal for a 75/90