The Planted Tank Forum - View Single Post - Complete Leak Check, CO2 pressurized system
View Single Post
post #174 of (permalink) Old 02-06-2014, 12:40 PM
Join Date: Feb 2014
Location: philippines
Posts: 2
hi. i have this regulator.

i did the soapy water test. no leak visible.

when i first got my 1 liter ista tank. it reads 1000 psi. and the low pressure guage at 50psi. when the solenoid valve opens it goes down to 16-25psi. but after two weeks. the high pressure gauge is still at 1000psi but the low pressure gauge goes down to nearly zero. the bubble output is staggered. not the usual constant bubble count. it will release many bubbl at once then stop. then release again and stop.

what seem to cause this? i tried step one. after the solenoid closes the HP gauge stays at 1000 psi but the low pressure gauge goes up to 50 psi.

my problem is that when the solenoid open the pressure at LP gauge drops until nearly zero but the JP gauge is still 1000psi.

pls help
alpo430 is offline  
For the best viewing experience please update your browser to Google Chrome