hmm... my setup is acting strange.
I did up all the bits, and it worked like it should. Ran it to check how long it takes to empty, and let it run dry.
Then refill to adjust outflow. Now it just sits there.. like it lost the will to live..
Well removed the hose and started it up.. woomp, runs like a baby.
Connected it again... no go....
Connected a larger piece of hose... runs smoothly.
So; 16/22mm hose, with a 4/6mm hose coming out of it.. sealed with silicone.
Works... once..?
Then a 12/16 inside the connector on the pump, runs fine..
Weird...
does the description make any sense?
it like it can't get "it out" so to speak... any ideas?
__________________
85G ; 6x54W T5 ATI Powermodule
Co2 via 6Kg bottle ; Milwaukee SMS122 Co2 controller ; Co2 reactor
Flourite RED
_
¾ tsp KNO3 3x week
¼ tsp KH2PO4 3x week
¼ tsp K2SO4 1x week
20ml CSM+B 3x week
50% W/c
|