The Planted Tank Forum - View Single Post - A Complete Idiot's guide to make an LED lighting unit
View Single Post
post #6 of (permalink) Old 01-10-2013, 01:01 PM
Pixel Prestidigitator
GraphicGr8s's Avatar
Join Date: Apr 2011
Location: West coast of the east coast of the USA.
Posts: 3,970
Good post. One thing I see is your method of soldering can lead to a cold solder joint. The ends of the wires should also be tinned. You apply heat to the wire not the solder. You apply the solder to the wire, not the tip of the iron. Doing that is what leads to a cold solder joint. It will work for a while but as moisture gets up into it it will fail. Then try finding it.
The solder is drawn up into the wires via capillary action. Same as if you were soldering copper pipes.

Dilution is the solution for the pollution.
Quote me as saying I was misquoted.
Once you get rid of integrity the rest is a piece of cake.
Here's to our wives and sweethearts - may they never meet.
If you agreed with me we'd both be right.
GraphicGr8s is offline  
For the best viewing experience please update your browser to Google Chrome