What are the dimensions? Could you post a tutorial?
Dimensions are 20x15x15cm (8x6x6 inch)
Unfortunately i don't have pictures step by step, but it's quite simple
1. you need to cut the glass. In my case 2 pieces of 20x15cm 2 pieces of 15x14cm and bottom 19,1x14cm. Sides are glued around the bottom (not on the bottom) Glass thickness is 4mm.
2. You need to tape sellotape that way when you put it together there is no visible spots on the glass, but only on joints - in my case 4mm out off edge on sides what are overlapping.
3. Sealing/assembling - first glue sides and bottom - make sure they are upright ( 90') and wait till silicon is dry (first wipe off all excessive silicone). Then glue front and back.
4. when all is dry remove sellotape, and if there is some (dry) excessive silicone use razor blade to remove it.
That's all, hope this is helpful