The Planted Tank Forum - View Single Post - How To: Dual Gauge Regulator
View Single Post
post #6 of (permalink) Old 12-01-2012, 09:32 PM
Darkblade48's Avatar
Join Date: Jan 2008
Location: Toronto/Singapore
Posts: 10,673
Originally Posted by sealmode View Post
Thanks for the reply Darkblade48. Im a little confused here on your suggestion to let it off gas by closing the main cylinder(the regulator knob counter-clockwise), but also keep the regulator knob dialed in(clockwise) for the remaining gas will be released?

I must be interpreting this wrong
Originally Posted by kevmo911 View Post
The cylinder is the tank filled with CO2. The knob on the top of that thing is what you'd turn off first.
As kevmo911 mentioned, the main cylinder knob refers to the CO2 cylinder knob, not the regulator knob.

Originally Posted by sealmode View Post
I ended up unscrewing the regulator from the tank and it zero'd it out. I then re-initialized the c02 setup with the above directions and its working well. ~30 PSI w/ and about 1bps
I am glad it worked out for you in the end.


A Primer to Pressurized CO2 and A Primer to Planted Tanks
Eheim Pimp #362 - Eheim 2213 x2, Eheim 2028, Eheim 2217, Eheim surface skimmer and Eheim autofeeder.
Victor Pimp #33 - HPT272-125-350-4M
Darkblade48 is offline  
For the best viewing experience please update your browser to Google Chrome