The Planted Tank Forum - View Single Post - Convert Lux meter to PAR meter?
View Single Post
post #142 of (permalink) Old 10-10-2012, 08:08 PM Thread Starter
Hoppy
Planted Tank Guru
 
Hoppy's Avatar
 
Join Date: Dec 2005
Location: Sacramento, CA
Posts: 20,312
After just a little sanding on both the OD of the lux meter cylinder and the ID of the acrylic cylinder:


Next, mark the acrylic cylinder for the wiring hole and drill it. Then put it together:


The hardest part was getting the tiny screw that holds the diode plate in place without hitting the electric cable behind it. I used needlenose pliers to put a kink in the cable to clear the mounting screw.

Finally, I got the lid back on top of the lux meter cylinder:


Somewhere along the way I put a hairline crack in the filter that fits in the lid, above the diode. I'm assuming that will have negligible effect on the operation.

To hold the lux meter cylinder in place, 4 small drops of Weldon #16.

Hoppy
Hoppy is online now  
 
 
For the best viewing experience please update your browser to Google Chrome