Glass lined masonary tank. - Page 2 - The Planted Tank Forum
Reply
 
LinkBack Thread Tools Display Modes
post #16 of 83 (permalink) Old 08-02-2009, 10:31 PM
Algae Grower
 
c_sking's Avatar
 
Join Date: Aug 2008
Location: San Diego
Posts: 89
I would say epoxy coat the concrete and use glass panels like tile except for a gaps to let water equalize behind them. Your in for a lot of issues No matter what you do. Would love to see some pics too.

V P #8
Me, no Iphone nope not I. Heck I would not even have a cell if I was not married.
c_sking is offline  
Sponsored Links
Advertisement
 
post #17 of 83 (permalink) Old 08-03-2009, 06:32 AM Thread Starter
Wannabe Guru
 
essabee's Avatar
 
Join Date: Oct 2006
Location: Ranchi, Jharkhand, India
Posts: 1,002
I have already carefully plastered the bricks with cement mortar paying attention to the plaster being vertical. Intend to smoothen the sides further by applying a thin coat of plaster of Paris and sand-papering the end product when cured. With a silicone coat over that, I don't think I would worry about pressure points building behind the glass.

If you have a choice, you have a problem, till you elect your choice. No choice, no problem, only consequences, learn to live with them.
essabee is offline  
post #18 of 83 (permalink) Old 08-03-2009, 02:53 PM
Algae Grower
 
Join Date: Aug 2007
Location: Washougal, Washington
Posts: 134
Quote:
Originally Posted by essabee View Post
I have already carefully plastered the bricks with cement mortar paying attention to the plaster being vertical. Intend to smoothen the sides further by applying a thin coat of plaster of Paris and sand-papering the end product when cured. With a silicone coat over that, I don't think I would worry about pressure points building behind the glass.
This sounds workable, the only issue that comes to mind is how are you going to get the silicone spread out over the whole surface without it skinning over before you get the glass embedded? I have had trouble just resealing a large tank getting the fillets in and smooth before it skins over.

Hoppy, I'm in on your next meeting.
bpimm is offline  
post #19 of 83 (permalink) Old 08-03-2009, 03:24 PM Thread Starter
Wannabe Guru
 
essabee's Avatar
 
Join Date: Oct 2006
Location: Ranchi, Jharkhand, India
Posts: 1,002
Quote:
Originally Posted by bpimm View Post
the only issue that comes to mind is how are you going to get the silicone spread out over the whole surface without it skinning over before you get the glass embedded
I thought about that. What I need is a couple of willing hands (Hoppy and you are invited ), anchor the bottom of the glass and keeping the rest of it tilted apply the silicone while straightening and pushing the glass to the wall. I also intend to use a more runny silicone sealant.

If you have a choice, you have a problem, till you elect your choice. No choice, no problem, only consequences, learn to live with them.
essabee is offline  
post #20 of 83 (permalink) Old 08-03-2009, 04:00 PM
Planted Tank Guru
 
Hoppy's Avatar
 
Join Date: Dec 2005
Location: Sacramento, CA
Posts: 19,931
Quote:
Originally Posted by essabee View Post
I have already carefully plastered the bricks with cement mortar paying attention to the plaster being vertical. Intend to smoothen the sides further by applying a thin coat of plaster of Paris and sand-papering the end product when cured. With a silicone coat over that, I don't think I would worry about pressure points building behind the glass.
I should have realized that you would already have done that. You clearly do think through your projects before starting them. But, my mind is still reeling over the idea of a 4 inch thick slab of granite held up by stilts....on a roof! I have a granite kitchen counter top, and once had a couple of big left over pieces of counter top granite, only one inch thick. Those sat on a couple of wood saw horses out behind the house for several years, just because it took 3 guys to carry them that far, and I couldn't lift them to move them, let alone make the coffee table my wife wanted made with them. Granite is heavy -very heavy!

Hoppy
Hoppy is offline  
post #21 of 83 (permalink) Old 08-04-2009, 12:18 AM Thread Starter
Wannabe Guru
 
essabee's Avatar
 
Join Date: Oct 2006
Location: Ranchi, Jharkhand, India
Posts: 1,002
Quote:
Originally Posted by Hoppy View Post
the idea of a 4 inch thick slab of granite held up by stilts....on a roof!
I built it in situ - so all I carried were the ingredients, that too in parts.

If you have a choice, you have a problem, till you elect your choice. No choice, no problem, only consequences, learn to live with them.
essabee is offline  
post #22 of 83 (permalink) Old 08-08-2009, 03:10 PM Thread Starter
Wannabe Guru
 
essabee's Avatar
 
Join Date: Oct 2006
Location: Ranchi, Jharkhand, India
Posts: 1,002
I finally finished all the cement mortar work. Tired! Will take pictures tomorrow to show what I achieved till date. What took time was the curing period before I could remove the scaffolding of the 2 beams it was necessary to cast. The next job I must finish is chipping the concrete roof of the aquarium to enable me to attach white vitreous tiles on its surface. I use the tiles as my reflecting surface.

The glass for the bottom has been delivered, that goes in first, its 12mm transparent.

If you have a choice, you have a problem, till you elect your choice. No choice, no problem, only consequences, learn to live with them.
essabee is offline  
post #23 of 83 (permalink) Old 08-09-2009, 05:34 AM Thread Starter
Wannabe Guru
 
essabee's Avatar
 
Join Date: Oct 2006
Location: Ranchi, Jharkhand, India
Posts: 1,002
I did not realise how tired I was yesterday. I got up 2 hours later than my normal time, and even then did not feel fresh, in fact my body felt leadened and all my actions lethargic. Breakfast and several cups of tea took me through the morning chores. So now feel more the thing, took some quick pictures (not good ones but these will do to give an idea of what I am trying to do. You will see part of my existing tank, "Incomparable", on one side.

View from inside my den:-

If you have a choice, you have a problem, till you elect your choice. No choice, no problem, only consequences, learn to live with them.

Last edited by essabee; 09-20-2009 at 02:48 AM.
essabee is offline  
post #24 of 83 (permalink) Old 08-09-2009, 05:38 AM Thread Starter
Wannabe Guru
 
essabee's Avatar
 
Join Date: Oct 2006
Location: Ranchi, Jharkhand, India
Posts: 1,002
..................... and the view from the terrace:-

If you have a choice, you have a problem, till you elect your choice. No choice, no problem, only consequences, learn to live with them.

Last edited by essabee; 09-20-2009 at 02:48 AM.
essabee is offline  
post #25 of 83 (permalink) Old 08-09-2009, 05:39 AM
CL
C-A-T-S
 
CL's Avatar
 
Join Date: Mar 2008
Location: Lexington, KY
Posts: 9,704
That is very cool, and has awesome dimensions. Make an awesome scape! Do you have a picture of the tank next to it?

CL is offline  
post #26 of 83 (permalink) Old 08-09-2009, 01:34 PM Thread Starter
Wannabe Guru
 
essabee's Avatar
 
Join Date: Oct 2006
Location: Ranchi, Jharkhand, India
Posts: 1,002
Quote:
Originally Posted by clwatkins10 View Post
That is very Do you have a picture of the tank next to it?
Try the 'View User Tanks' under my avatar.

If you have a choice, you have a problem, till you elect your choice. No choice, no problem, only consequences, learn to live with them.
essabee is offline  
post #27 of 83 (permalink) Old 08-11-2009, 01:07 AM
Fresh Fish Freak
 
lauraleellbp's Avatar
 
Join Date: Feb 2008
Location: Tampa, Florida
Posts: 24,403
That brain of yours just never runs out of ideas, does it?!!

You are by far the most out-of-the-box aquarium designer I've ever come across LOL

This is utterly and completely beyond my scope of expertise, but I'll definitely be watching! Who knows what I might learn!

Tampa Bay Aquarium Society - Next meeting Monday, Oct 13, 2014 @ 7:15pm- See ya there!
TBAS Annual Fish Auction - November 1st!!

lauraleellbp is offline  
post #28 of 83 (permalink) Old 08-17-2009, 03:39 AM Thread Starter
Wannabe Guru
 
essabee's Avatar
 
Join Date: Oct 2006
Location: Ranchi, Jharkhand, India
Posts: 1,002
Being retired and with 6 dogs, numerous planted tank and my garden to look after, new projects only get so much time as I can spare. The type of work next on the project show what enthusiasm will be applied. As the work was chipping the roof of tank in preparation for the glazed tile work later - I did it in bits and pieces just before bath, as chipping showered me with bits of sand every time brought the hammer into play on the chisel. Now that's behind me- you will see better progress. If you compare the following picture with the second-last that I had earlier attached you will find what I have done last week.

If you have a choice, you have a problem, till you elect your choice. No choice, no problem, only consequences, learn to live with them.

Last edited by essabee; 09-20-2009 at 02:48 AM.
essabee is offline  
post #29 of 83 (permalink) Old 08-17-2009, 12:54 PM Thread Starter
Wannabe Guru
 
essabee's Avatar
 
Join Date: Oct 2006
Location: Ranchi, Jharkhand, India
Posts: 1,002
I hated that chipping work so it took a lot of time. I did the plaster of Paris work preparing the masonry surface to take the glass and finished it today.

If you have a choice, you have a problem, till you elect your choice. No choice, no problem, only consequences, learn to live with them.

Last edited by essabee; 09-20-2009 at 02:48 AM.
essabee is offline  
post #30 of 83 (permalink) Old 08-17-2009, 04:30 PM
Planted Tank Guru
 
Hoppy's Avatar
 
Join Date: Dec 2005
Location: Sacramento, CA
Posts: 19,931
Is the upper opening to the room there for access to the tank? And, do you intend to use the daylight outside as a supplemental light source? And, how will the front, viewing glass be held in?

This is shaping up very nicely!

Hoppy
Hoppy is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome