DIY ADA Mini Solar - The Planted Tank Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 19 (permalink) Old 02-19-2013, 07:17 PM Thread Starter
Planted Tank Enthusiast
 
brohawk's Avatar
 
Join Date: May 2008
Location: Seattle, WA
Posts: 614
DIY ADA Mini Solar

The plastic endcaps on my Coralife Mini have been cracking and falling apart, so I finally decided to just rip it apart and use the innards for this project. I've also been planning to make a light similar to ADA's Grand Solar for my main show tank for quite some time, and I thought this would be good practice for me as I have no real prior experience working w/ metal. I found aluminum to be only slightly more difficult than working w/ wood, and bending the sheet and getting the endcaps cut to match far more easy than I had feared. In hindsight, I would have over-bent the sheet and then only would have had to use 2 rivets in the top of the fixture rather than 6. Still, once painted I don't think the extra rivets will detract too much from the final appearance.

It's still a work in progress; mainly left to do is finish the base, sand, prime and paint, and then sort out the wiring. As I don't have a particular tank that I want to use this on and for future flexibility, I've designed it to be adjustable in both height and length. Here are some pics of the build process:





















Materials:
0.025" Aluminum sheet
1" x 1/8" Aluminum flat bar
1/4" Aluminum tubing
Junked ballast box from a commercial lighting unit
Rivets
Screws
JB Weld
Metal epoxy
Spray paint (TBD)
Primer
Sand paper

Tools:
Hack saw
Hand riveter
Tin snips
Electric drill
Dremel
Electric sander
Screwdriver
Small pulley for bending the tubing

I'll update this thread when I make more progress. Meantime, if anyone's got questions, please feel free to ask. I know I'm not the first here to want to build a Mini Solar-esque light, and now that they're discontinued, I hope this inspires others to take a stab at building their own too.

Update 04/08/13:

Finished the base, minus some sanding still needed to be done. I drilled multiple holes through the base unit and the sheet, and counter sunk the holes slightly on the bottom of the base so that the bits of JB Weld I threaded through the holes would have more to grab onto. Used steel for the sheet so I could use something thinner that wouldn't flex much. I also went w/ a rather small sized sheet rather than the footprint of an actual tank, as I haven't actually decided what size tank I'll use this on yet. I figure once there's a sheet of foam over it, it won't matter too much that the sheet doesn't extend to all 4 corners of the tank. Still not sure if it'll be stiff enough to hold the final weight of the fixture once it's wired and bulbs are installed, but the ballasts will also be in the base unit and should help.





Update 04/09/15:

Sanded and primed. Top coat to come in the next couple weeks (hopefully).



Update 5/30/15:

Crudely carved out some exit holes for the wiring with a hacksaw.



And finally got it painted. Not too shabby if I say so myself.









And I now have most of it wired up. It's going to be a tight fit but I think it'll all fit.





Now if I can just find the bulbs for this thing so I can test that it works. I guess that's the problem with taking 2 years to finish a project. No idea where I put them.

Update 5/31/15:

Found the bulbs. And it works! And (pretty much) looks like I'd hoped it would. Final pics:










Last edited by brohawk; 06-01-2015 at 01:39 AM. Reason: Update
brohawk is offline  
Sponsored Links
Advertisement
 
post #2 of 19 (permalink) Old 02-19-2013, 09:54 PM
Planted Tank Guru
 
talontsiawd's Avatar
 
Join Date: Oct 2008
Location: Concord, CA
Posts: 4,576
Send a message via AIM to talontsiawd
That looks really good. Is their any way you could get rid of the outside rivets? Obviously if you can weld aluminum, that would be the way but that's not something everyone can do. Or maybe smaller ones? That would just be my preference.

Amazing work though, this is probably the best looking attempt I have seen on the top part and the stand part looks perfect.
talontsiawd is offline  
post #3 of 19 (permalink) Old 02-19-2013, 10:14 PM
Planted Tank Enthusiast
 
sjb1987's Avatar
 
Join Date: Feb 2012
Location: Van Buren, Arkansas
Posts: 801
sjb1987 is offline  
post #4 of 19 (permalink) Old 02-19-2013, 10:16 PM Thread Starter
Planted Tank Enthusiast
 
brohawk's Avatar
 
Join Date: May 2008
Location: Seattle, WA
Posts: 614
Thanks very much for the compliments. Yes, welding would be the obvious choice here. And while I do have access to a buddy who's a professional welder, I wanted to try this w/ just some common tools instead. Like I said in the initial post, I could have reduced the number of rivets from 6 to just 2 in the top of the half-pipe. Especially if I used slightly thicker sheet and a little epoxy or JB Weld to bond the sheet to the arcs made of flat bar. I don't know if I'd trust it to last long once in operation w/ the heat the bulbs put out if I just used epoxy and w/o at least 2 rivets. You could use smaller rivets though, for sure. I chose larger as I thought they actually might detract less, being flatter than smaller ones. Personal preference though. The 3 rivets in each end cap would probably be unavoidable but I used smaller ones there anyway.
brohawk is offline  
post #5 of 19 (permalink) Old 02-19-2013, 10:21 PM
Newbie
 
Join Date: Jan 2013
Location: Rockwall, TX
Posts: 1
DIY ADA Mini Solar

Very impressive !
Dcwaskom is offline  
post #6 of 19 (permalink) Old 02-28-2013, 04:54 AM
Planted Member
 
Join Date: Nov 2012
Location: Honolulu, HI
Posts: 173
No experience working with metal? Coulda fooled me!
Knicolas is offline  
post #7 of 19 (permalink) Old 02-28-2013, 07:23 PM Thread Starter
Planted Tank Enthusiast
 
brohawk's Avatar
 
Join Date: May 2008
Location: Seattle, WA
Posts: 614
Thanks! Hoping to make a little more progress this weekend but we'll see.
brohawk is offline  
post #8 of 19 (permalink) Old 02-28-2013, 07:26 PM
Sponsor
 
Lowe's Avatar
 
Join Date: Nov 2011
Location: Chicago
Posts: 750
Quote:
Originally Posted by Knicolas View Post
No experience working with metal? Coulda fooled me!
Ditto that. Nice work.
Lowe is offline  
post #9 of 19 (permalink) Old 02-28-2013, 09:21 PM
Planted Tank Enthusiast
 
pweifan's Avatar
 
Join Date: Nov 2006
Location: Cleveland, OH
Posts: 867
You're a natural. This turned out really well. I'm looking forward to seeing the end result.
pweifan is offline  
post #10 of 19 (permalink) Old 02-28-2013, 09:39 PM
Planted Member
 
Chulios66's Avatar
 
Join Date: Jan 2013
Location: Filer,ID
Posts: 274
Thumbs up Sweet!!!

Amazing, Nice Job.
Chulios66 is offline  
post #11 of 19 (permalink) Old 03-01-2013, 12:16 PM
Planted Member
 
Join Date: Dec 2006
Location: NY
Posts: 228
Quote:
Originally Posted by brohawk View Post
epoxy or JB Weld
That was my first thought. JB Weld itself is rated to constant 500 degrees F, and there's no way your lights are gonna get that hot!

Great job by the way.
All your base is offline  
post #12 of 19 (permalink) Old 03-01-2013, 10:27 PM Thread Starter
Planted Tank Enthusiast
 
brohawk's Avatar
 
Join Date: May 2008
Location: Seattle, WA
Posts: 614
Thanks again everyone. I'm looking fwd to seeing its final form as well.

Quote:
Originally Posted by All your base View Post
That was my first thought. JB Weld itself is rated to constant 500 degrees F, and there's no way your lights are gonna get that hot!
Yeah, I'm not worried about JB Weld withstanding the heat alone. I've used it on a few automotive projects where plugging a hole was in order and it definitely stays put. But I'm uninformed and thus concerned about its bonding properties, even w/ just a little heat, when used between 2 flat surfaces instead. Next on the to-do-list is bonding a sheet of metal to the base, that goes under and thus is weighed down by the aquarium. The weight of the top part of the light will require a good bond between the base and this undersheet. Anyone have opinions on whether the JB Weld will hold? Sure, roughing the two surfaces up beforehand should help but will it be enough? Or should I stick w/ the tube of metal epoxy I also have on hand?
brohawk is offline  
post #13 of 19 (permalink) Old 03-01-2013, 10:49 PM
Planted Tank Obsessed
 
kingjombeejoe's Avatar
 
Join Date: Feb 2013
Location: Connecticut
Posts: 416
I like the look of the rivets it makes it yours and not a copy.
kingjombeejoe is offline  
post #14 of 19 (permalink) Old 03-20-2013, 01:06 AM
Planted Tank Enthusiast
 
CPDzeke's Avatar
 
Join Date: Jan 2013
Location: Minnesota
Posts: 960
No updates? I kinda need a full tutorial.

ADA Gentleman #1
Treeless Mountain V3
CPDzeke is offline  
post #15 of 19 (permalink) Old 04-08-2013, 04:54 PM Thread Starter
Planted Tank Enthusiast
 
brohawk's Avatar
 
Join Date: May 2008
Location: Seattle, WA
Posts: 614
Forgot to mention; I found some rubber gaskets that are the same 1/4" ID as the tubing's OD which you can see in the last pic. This makes the fixture's position much more stable, and won't scrape the eventual paint job up when adjusting the height and/or length.

Weather's been pretty crummy up here lately. Not sure when I'll have a nice enough day to start the painting process.
brohawk is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome