Ok major update to this project had a few design changes due to my own lack of preparation and planning some things you just don't consider until you get there and all you can do is move on or give up I choose to move on and chalk it up to a learning experience.
So far the doors have been given the axe in favor of a much simpler removable panel just need to get the hardware and trim it to fit as well as getting some trim pieces to give it a nice finished look. Unfortunately Due to exhausting my construction budget that part of the build is going to have to wait till spring. The W.A.F. (Wife Acceptance Factor) is in the danger zone with all the dust not to mention the stink of stain and polyurethane so the rest of the construction is on hold till the spring.
Well on to the pics.
First of the canopy has been stained and has a one coat of wipe on poly.
Have about 4 coats of satin wipe on poly on the top of the stand
Finished up the electrical so everything is working as planned, Switch 1- Hood lights, Switch 2- Under stand maintenance lights, Switch 3- Water pump to evacuate waste water to nearest drain.
Good look at the led lighting under the stand as well as the electrical still needs to be neatened up.
Close up of the LEDS mounted on my aluminum bar complete with 60* optics, Fan mounted on the back to help dissipate heat. also a shot of my old 50/50 power compact fluorescent the bulbs are over 10 years old but they still work so I'll replace them eventually.
and the final shot of the plumbing at least on end any way ball valve is there to keep water from flowing back into the pump I'd rather leave it in the pipe till the next time. Also what I consider a must is the GFCI outlet that powers everything on the stand can't be too cautious.
All the wood is maple ply except for the top that is solid maple and the hood is clad in luaun ply (sp) stain is red Mahogany.