||LinkBack||Thread Tools||Display Modes|
Can you clarify what extension you're referring to? Not quite getting what you mean. As for the dual ramp, it will just be the single ramp with 2 channels. IT will not have moonlight function. The pro however, will. This is why we don't like to release information too early. There are constant changes until it is finally done.
Hopefully this picture better explains what I am asking.
Basically I want to know, when using the Pro time, whether both Sat+ need to be physically plugged into the timer or if one could be plugged in via an extension cord.
Planted Tank Enthusiast
OK, so I have three of these fixtures. I'm redoing my "fish room" and when it's done, two will be on a rack and one will be across the room. If I'm reading these threads correctly, I'll probably need two timers. One for the rack as I can link two fixtures easily together, and one for the 75g across the room. Is this a correct assumption?
Originally Posted by gagaliya View Post
From what it seems based on what you said, the transformer (which has the male DC plug) is what is connecting to the timers...correct? If so, I would think that you could plug in the transformer to an extension cord to run that to the timer then...
But if it connects to the female DC plug on the fixture then that would be a bit of a struggle to reach the timer.
Originally Posted by zodduska View Post
If I do get another Sat+ I'll have to find a DC extension.
The pro timer will have a female connection for the power supply and 2 male chords to connect to the lights. So if you can find a extension chord with same male and female parts, reaching from the timer to your light on the other side of the wall, it should work.