The Planted Tank Forum - View Single Post - Just built a DIY LED Controller
View Single Post
post #1 of (permalink) Old 06-07-2011, 05:52 PM Thread Starter
Planted Tank Enthusiast
O2surplus's Avatar
Join Date: Jan 2010
Location: "Out West, in the Land of Fruits & Nuts"
Posts: 808
Just built a DIY LED Controller

Hey everybody,

I found plans for this neat little DIY led controller a while ago on another forum, so I modified it a bit and cranked out a couple of examples. It's based on the Arduino UNO micro-controller, so it shares a lot of the same hardware and is programmed using the Arduino IDE. This controller is set up to provide 4 PWM outputs that can be programmed to run independent of each other. Each channel can be set for different on/off times, led intensity, and fade duration. It features an onscreen menu and 4 input buttons for menu navigation. I built this particular version of the controller with 5 volt outputs only. since my custom built CAT4101 driver boards only require 5 volts to operate. I also used mostly SMD components for it's construction to save board space and to provide a challenge to myself, (I had to learn how to solder using hot air for this project) I'll probably produce another 10v version that will be directly compatible with the popular MeanWell ELN series led drivers since a few people have already asked for one. Here's a picture of the controller - Let me know what ya'll think. I can post the Board files, bill of materials, and the firmware, If anyone wants to create one of these for themselves.
Attached Thumbnails
Click image for larger version

Name:	IMG_1337.jpg
Views:	132
Size:	103.3 KB
ID:	31543  

O2surplus is offline  
For the best viewing experience please update your browser to Google Chrome