sealing natural bamboo shoots - The Planted Tank Forum
LinkBack Thread Tools Display Modes
post #1 of 6 (permalink) Old 07-07-2009, 10:34 PM Thread Starter
Planted Member
mubender's Avatar
Join Date: Mar 2009
Location: whitehouse, tx
Posts: 202
sealing natural bamboo shoots


First off, i've done a lot of searching and buying/testing of bamboo/polyurethane varnish combo's to find one that is safe for my aquarium.

here's the scoop.
I've decided to go for an asian themed aquarium scape much like that of roy deki's bamboo aquarium.
From what i've been reading it is necessary to coat the bamboo shoots with a polyurethane varnish of some sort in order to keep the natural bamboo from leeching toxins from inside the cane itself.
My first try(out of the aquarium) was bamboo shoots with a minwax polyurethane varnish...4 coats. I tested this combo outside the aquarium in a clean plastic bucket and noticed the varnish began to liquify and leech completely into the water column seriously fouling the water.

My second try was with a new set of bamboo with the cabot brand semi-gloss polyurethane 8017, and 4 coats...again i let them sit in a clean bucket to ensure safe water parameters, and again the polyurethane liquified into the water column fouling the water to unsafe parameters.

I'm out of options, and have been doing lots of searches, a few sites i have found simply state to coat the bamboo with polyurethane varnish, but don't give a varnish type/name/etc.

I was simply wondering if anyone had any options i could try before i pull my hair out...i've been at this for 2 months and still haven't come to a good conclusion.

Thanks in advance,
mubender is offline  
Sponsored Links
post #2 of 6 (permalink) Old 07-07-2009, 11:02 PM
Algae Grower
Join Date: Jul 2009
Location: Columbia, South Carolina
Posts: 60
Have you read up on or thought about marine grade epoxy? It can be alittle pricey but is supposed to be good. I used it when I made a back drop for in my tank.
Bellaru is offline  
post #3 of 6 (permalink) Old 07-11-2009, 04:08 PM
are you experienced?
customdrumfinishes's Avatar
Join Date: Apr 2008
Location: south carolina
Posts: 1,989
aquaticmagic sells the bamboo caves, they are burned and black in color, i guess to seal them ?
i have read up on bamboo in aquariums several times and seems everyone has there own opinion on it lecching or falling apart in the tank if left natural and dried out.

id like to know how to keep it in the tank an it not rot. the marine grade epoxy or fiberglass resin would work but it would be shinny , plastic looking and not cheap.

this post should be moved to the diy forum
customdrumfinishes is offline  
post #4 of 6 (permalink) Old 07-12-2009, 01:53 AM
Planted Tank Obsessed
Join Date: Aug 2008
Location: LosAngeles
Posts: 385
krylon sells clear gloss and clear matt spray finish in spray paint cans. its acrylic resin based and i would think an excellent sealer for bamboo. the clear matt might not look as 'plastic' as the gloss. basically its acrylic resin (same used in acrylic aquariums) dissolved in solvents. it might be a good alternative to the urethane but give it a day to cure and then soak it to remove any residual solvents.
ER9 is offline  
post #5 of 6 (permalink) Old 08-07-2009, 10:53 PM
Algae Grower
Join Date: Feb 2009
Location: windsor,va
Posts: 5
I have heard that if you let the bamboo grow out of the tank it will stop it from rotting.
brycerb is offline  
post #6 of 6 (permalink) Old 08-15-2009, 07:47 AM
Planted Tank Guru
talontsiawd's Avatar
Join Date: Oct 2008
Location: Oakland, CA
Posts: 4,675
Send a message via AIM to talontsiawd
I forget the company but somebody makes an actual catilized spray clear out of can. You can only find it at autobody supply stores (not like autozone). It is somewhat pricey as well. I think this would do the trick as it actually has hardener in it (it is like 2 part expoxy). I would be it is overkill but if you are really struggling, might be worth a shot. I think any clear enamal will hold up well, especially automotive stuff in a can (though it doesn't compare to automotive paint out of a gun).
talontsiawd is offline  

Quick Reply

Register Now

In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome