165 Impulse Build (56k) --- New FTS post #208 - The Planted Tank Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 235 (permalink) Old 05-13-2011, 11:34 PM Thread Starter
Wannabe Guru
 
jcgd's Avatar
 
Join Date: Feb 2004
Location: Calgary, Alberta, Canada
Posts: 1,985
Send a message via MSN to jcgd
165 Impulse Build (56k) --- New FTS post #208



Scratch doing a 125. I got an eurobraced 165 gallon from a local guy for $450. It has a drilled overflow and includes the metal stand and return pump/plumbing and I need help assembling this beast. Much better dimensions... pretty much my dream tank at 72"x24"x22". I've always wanted the 2' of width and 2' of height is a touch too much for my liking, so I'm glad it's 22". I ended up tearing it down and had some changes made. I found the original builder and had him CNC the end panel to add a weir and external overflow. I also had two 3/4" returns added on each side of the OF and also a few holed in the bottom for a closed loop.

I have over a year invested into the setup of this beast and I'm hoping to have it filled in a few weeks.

Current Equipment List:
Eheim 1262 Return pump
Eheim Universal 1260 for closed loop (635 GPH)
DIY LED Fixture (Build thread)
Aquajunior Contoller with DC8, ph and temp probes
Linde Redline Regulator, Fabco NV, Brass bubble counter, Berkert Solenoid, 2x 10# CO2 tank
Bubble Magnus Triple Pump Doser
54 Breeder open sump
2x Ebo Jager 200 watt

Hardscape
9 x 9L ADA Amazonia NEW
Gnarled Manzanita (Plantbrain)
Seiryu Stone (PC1)

Fauna
Puntius denisonii
Caridina multidentata

I'll take any thoughts and suggestions. I hope everyone digs this build.

Last edited by jcgd; 08-15-2012 at 11:26 PM. Reason: Update
jcgd is offline  
Sponsored Links
Advertisement
 
post #2 of 235 (permalink) Old 05-14-2011, 12:40 PM
Planted Tank Guru
 
Hilde's Avatar
 
Join Date: May 2008
Location: Mableton, GA
Posts: 5,726
Quote:
Originally Posted by justincgdick View Post
I need help assembling this beast. Dimensions 72"x24"x22".
I could DIY a led fixture that can do sunrise/sunset and all the fancy stuff. I don't know how much this would cost though.
Check out ah supply, catalina, Big Als.
Also Hoppy has a thread on diy led fixture.
Hilde is online now  
post #3 of 235 (permalink) Old 05-14-2011, 04:11 PM Thread Starter
Wannabe Guru
 
jcgd's Avatar
 
Join Date: Feb 2004
Location: Calgary, Alberta, Canada
Posts: 1,985
Send a message via MSN to jcgd
Quote:
Originally Posted by Hilde View Post
Check out ah supply, catalina, Big Als.
Also Hoppy has a thread on diy led fixture.
Thanks, I've check them out and I'm thinking if I'm going to be spending 4-500 on a t5ho fixture I might as well diy a led fixture. I really want the sunrise/sunset.

I've started a thread in the diy section to get some advice and document the build.
jcgd is offline  
post #4 of 235 (permalink) Old 05-14-2011, 05:46 PM
Wannabe Guru
 
tharsis's Avatar
 
Join Date: Oct 2009
Location: Lincoln, RI
Posts: 1,203
very cool! Looking forward to watching this one progress.

Lets see some pics of the tank
tharsis is offline  
post #5 of 235 (permalink) Old 05-14-2011, 05:50 PM
Algae Grower
 
Join Date: Apr 2009
Location: El Centro, CA
Posts: 87
Subscribed.


Sent from my iPhone using Tapatalk
spunjin is offline  
post #6 of 235 (permalink) Old 05-14-2011, 09:28 PM Thread Starter
Wannabe Guru
 
jcgd's Avatar
 
Join Date: Feb 2004
Location: Calgary, Alberta, Canada
Posts: 1,985
Send a message via MSN to jcgd
I will post some pics tonight after I pick it up. I'm super excited for this build. Thinking about stocking already. 40 praecox would be sweet.

I need to figure out my sump.
jcgd is offline  
post #7 of 235 (permalink) Old 05-15-2011, 03:52 AM
Planted Tank Guru
 
Hilde's Avatar
 
Join Date: May 2008
Location: Mableton, GA
Posts: 5,726
Check out Hoppy's Low tech tank with DIY Led fixture
Hilde is online now  
post #8 of 235 (permalink) Old 05-15-2011, 05:56 AM Thread Starter
Wannabe Guru
 
jcgd's Avatar
 
Join Date: Feb 2004
Location: Calgary, Alberta, Canada
Posts: 1,985
Send a message via MSN to jcgd
Thanks, I have a lot of reading to do. Overall, it does seem pretty simple. The hard part is deciding what you want to do. I'm an electrician by trade, so the wiring and fabrication should be too bad. I've done a rough budget, and I'm already at $524.53 plus $201.00, 48 XML leds/optics plus controller and four drivers. I will still need to buy the parts to assemble the fixture.

I picked up the tank tonight and my god is it heavy. Only me and my buddy to carry it up a set of stair and through a house to the truck, and then my landlord helped unload it as well around a house, down a concrete stairwell and into my tiny apartment. It was interesting...
jcgd is offline  
post #9 of 235 (permalink) Old 06-19-2011, 06:01 AM Thread Starter
Wannabe Guru
 
jcgd's Avatar
 
Join Date: Feb 2004
Location: Calgary, Alberta, Canada
Posts: 1,985
Send a message via MSN to jcgd
I've been doing some major researching and have ordered parts for my LED build. See thread here and a Arduino based controller how-to thread here.
jcgd is offline  
post #10 of 235 (permalink) Old 08-18-2011, 01:27 AM Thread Starter
Wannabe Guru
 
jcgd's Avatar
 
Join Date: Feb 2004
Location: Calgary, Alberta, Canada
Posts: 1,985
Send a message via MSN to jcgd
I think I should reseal my tank. It's very new, but, the tank was used for salt water perviously and the silicone is very dirty and lifted in quite a few spots. I think the previous owner was using a razor blade to scrape the coraline off. All in all, the inner seals look terrible and I would like to re-do them.

Rebuilding the whole tank isn't going to happen. I don't have the space, tools, or knowledge to reassemble the tank but I think I should at least scrape the inside seams and reseal.

At the moment the tank has a peninsula style over flow. It is internal, runs top to bottom and is centered at one end of the tank. If I am resealing I can remove the overflow and relocate it outside the tank. I'm just not sure the best way to cut out a slot for the overflow. I really need some guidance here.
jcgd is offline  
post #11 of 235 (permalink) Old 08-30-2011, 01:39 AM Thread Starter
Wannabe Guru
 
jcgd's Avatar
 
Join Date: Feb 2004
Location: Calgary, Alberta, Canada
Posts: 1,985
Send a message via MSN to jcgd
I received all my wood for Mr. Tom Barr. A little hiccup along the way, but he pulled through and I got exactly what I wanted.

I threw together my first attempt at the hardscape. You can really see the look I'm going for, although I will have to tweak it a bit. Just for reference, the board and styrofoam are both the tank's footprint - 72"x24". The green string is the approximate water line, about 21".







The tank will be in a corner so only the front and left side will be visible.

Last edited by jcgd; 09-01-2011 at 02:22 AM.
jcgd is offline  
post #12 of 235 (permalink) Old 08-30-2011, 01:40 AM
Planted Tank Enthusiast
 
TeamTeal's Avatar
 
Join Date: Mar 2010
Location: Bay Area
Posts: 883
wow thats nice work with the scape.

-SF Giants WS champs-
Haters gonna Hate

TeamTeal is online now  
post #13 of 235 (permalink) Old 08-30-2011, 01:43 AM
Planted Tank Guru
 
2in10's Avatar
 
Join Date: Feb 2011
Location: Sparks, NV
Posts: 2,585
Very nice wood, looks pretty good as placed
2in10 is offline  
post #14 of 235 (permalink) Old 08-30-2011, 01:49 AM Thread Starter
Wannabe Guru
 
jcgd's Avatar
 
Join Date: Feb 2004
Location: Calgary, Alberta, Canada
Posts: 1,985
Send a message via MSN to jcgd
Quote:
Originally Posted by TeamTeal View Post
wow thats nice work with the scape.
Thanks, I tried.

Quote:
Originally Posted by 2in10 View Post
Very nice wood, looks pretty good as placed
It's beautiful wood. It looks so small in the pics, but the structure is pretty huge.

I feel like the horizontal pieces on the left are too thick. Like the scape is front heavy. They are really sweet branches though, so I'm hoping I can cover them a bit while planting and pull them into scale with the right side.
jcgd is offline  
post #15 of 235 (permalink) Old 08-30-2011, 02:07 AM
Planted Tank Guru
 
2in10's Avatar
 
Join Date: Feb 2011
Location: Sparks, NV
Posts: 2,585
Maybe rotate the structure on the right side toward the front a bit.
2in10 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome