The Edge - 6G - The Planted Tank Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 64 (permalink) Old 01-28-2011, 05:32 AM Thread Starter
The Weather's Here
 
toofazt's Avatar
 
Join Date: Jun 2005
Location: Bookings, OR
Posts: 1,250
Cool The Edge - 6G

Getting back into the hobby after a couple year hiatus. Wanted to try something different so I picked up a Fluval Edge 6 gallon aquarium. There's a couple of flaws with the design of the tank but all in all, I'm happy with it. The stock halogen lights aren't that great so I'm going to replace them with two MR16 LED lamps. I've added a 13W compact florescent to the end of the stock light bar. I'm also waiting on a new immersible heater so I can clean it up a bit inside.

I used Aqua Soil Amazonia for the substrate and lace rock for the hard scape. Right now I only have Blyxa Japonica (background), a stem of Staurogyne Repens (front left), and a couple currently melted Cryptocoryne Parva (front right). I'm not set on what plants or how I'm going to arrange them yet. I want to keep it relatively low-tech, only dosing Flourish and Excel for now. The tank has been setup for about a week and I'm just waiting for it to cycle. I've got some more plants coming next week and I'm planning on adding a couple Rummy Nose Tetras down the road...

Current Flora:
Dwarf Sagittaria Subulata
Nymphoides Taiwan
Subwassertang
Needle Leaf Java Fern
Cryptocoryne Parva
Blyxa Japonica
Staurogyne Repens
Myrio Mattogrossense
Hygrophila Polysperma
Fissidens Fontanus

Current Fauna:
2 Rummynose Tetra (Hemigrammus Rhodostomus)
1 White Cloud (Tanichthys Albonubes)
1 Oto (Otocinclus)
1 Crystal Red Shrimp (Caridina sp)
1 Ghost Shrimp (Palaemonetes sp)
5 Assassin Snail (Clea Helena)

3/16/11


3/2/11


2/18/11


2/9/11


1/27/11


DIY Electric Shut-Off Valve ........... DIY Fluval Edge Light Mod
............................My Current Aquarium............................

Last edited by toofazt; 05-12-2011 at 07:33 PM.
toofazt is offline  
Sponsored Links
Advertisement
 
post #2 of 64 (permalink) Old 01-28-2011, 05:49 AM Thread Starter
The Weather's Here
 
toofazt's Avatar
 
Join Date: Jun 2005
Location: Bookings, OR
Posts: 1,250
It's pretty much impossible to light this tank evenly due to the aesthetic design of the hood. I would like to add another compact fluorescent but they don't have the directional ability of the LED's...

I found this 13W CFL at Walmart for $10. I couldn't find it on their website but here it is on Northern Tool: http://www.northerntool.com/shop/too...9807_200309807

It comes apart easily and includes a 6500K bulb. You can use the clear plastic tube to protect the bulb and it even comes with a cap you can flip around and use to seal the tube from accidental splashes. There's also a decent reflector in there. This is an economical option you can purchase locally!



DIY Electric Shut-Off Valve ........... DIY Fluval Edge Light Mod
............................My Current Aquarium............................
toofazt is offline  
post #3 of 64 (permalink) Old 01-28-2011, 06:30 AM
Algae Grower
 
Join Date: Jan 2011
Location: California
Posts: 32
Nice edge. It is really clean and neat. Look forward for updates.
Wolfgang is offline  
post #4 of 64 (permalink) Old 01-28-2011, 12:13 PM
Algae Grower
 
senoufo's Avatar
 
Join Date: Nov 2008
Location: Montreal
Posts: 31
check my sig for ideas on LED build.
senoufo is offline  
post #5 of 64 (permalink) Old 01-28-2011, 04:56 PM Thread Starter
The Weather's Here
 
toofazt's Avatar
 
Join Date: Jun 2005
Location: Bookings, OR
Posts: 1,250
Quote:
Originally Posted by senoufo View Post
check my sig for ideas on LED build.
Wow, that's an in-depth build. Looks very clean and well thought out. Any reason you went with LEDs over SMDs? What did the build end up costing?


DIY Electric Shut-Off Valve ........... DIY Fluval Edge Light Mod
............................My Current Aquarium............................
toofazt is offline  
post #6 of 64 (permalink) Old 01-28-2011, 05:09 PM
Algae Grower
 
senoufo's Avatar
 
Join Date: Nov 2008
Location: Montreal
Posts: 31
i must be old or the coffee didn't take...what's SMD?

If SMD means the MR16s with embedded LEDs, it may give off a bit better light but the spread is still poor ( corners are dark, and the spectrum is not what i was looking for ), also they are very close to the water and i never trusted 2 pins to hold up this light for a very long time.

the build was $120 ish, and took about 48 hours from start to finish. It was fun as i wanted to keep it as stock as possible, and wanted the proper light spectrum for reefing, so 3 watt crees was considered due to lots of reefers using those and having success with different types of coral.

thanks btw :-)
senoufo is offline  
post #7 of 64 (permalink) Old 01-28-2011, 05:44 PM Thread Starter
The Weather's Here
 
toofazt's Avatar
 
Join Date: Jun 2005
Location: Bookings, OR
Posts: 1,250
Quote:
Originally Posted by senoufo View Post
i must be old or the coffee didn't take...what's SMD?

If SMD means the MR16s with embedded LEDs, it may give off a bit better light but the spread is still poor ( corners are dark, and the spectrum is not what i was looking for ), also they are very close to the water and i never trusted 2 pins to hold up this light for a very long time.

the build was $120 ish, and took about 48 hours from start to finish. It was fun as i wanted to keep it as stock as possible, and wanted the proper light spectrum for reefing, so 3 watt crees was considered due to lots of reefers using those and having success with different types of coral.

thanks btw :-)
Surface mount device, it's those low profile square LEDs. I googled 3 watt crees and I think we might be talking about the same thing, lol. SMDs generally have a much wider view angle than LEDs.



DIY Electric Shut-Off Valve ........... DIY Fluval Edge Light Mod
............................My Current Aquarium............................
toofazt is offline  
post #8 of 64 (permalink) Old 01-28-2011, 05:50 PM
Algae Grower
 
senoufo's Avatar
 
Join Date: Nov 2008
Location: Montreal
Posts: 31
gotcha!

the cree XRE's i used are 100 degrees, so no problem there, and i have no spotlighting or dark corners.

cool whites are 10k temp, royal blues are 450 to 465 nanometer wavelength.
senoufo is offline  
post #9 of 64 (permalink) Old 01-29-2011, 12:49 PM
Algae Grower
 
Join Date: Dec 2010
Location: Los Angeles, CA
Posts: 130
Would it be possible for you to show a picture of the lighting mod mounting (the Walmart 13w)? Specifically, I am having trouble imagining how much of the flashlight is mounted (the whole thing?)

I am in the process of upgrading the lighting in my edge. Thanks!

Last edited by tetraontheedge; 01-29-2011 at 12:50 PM. Reason: missing "?"
tetraontheedge is offline  
post #10 of 64 (permalink) Old 01-29-2011, 02:37 PM
Planted Tank Enthusiast
 
jeffvmd's Avatar
 
Join Date: Apr 2010
Location: NYC
Posts: 898
Here is the light mod in the official edge thread.
http://www.plantedtank.net/forums/pl...ge-thread.html
jeffvmd is offline  
post #11 of 64 (permalink) Old 01-29-2011, 03:14 PM
Algae Grower
 
Join Date: Dec 2010
Location: Los Angeles, CA
Posts: 130
Thanks for that--yes, that is where I got the idea about the lighting mod to start with.

My question is about how the flashlight mod mentioned in this thread works--I don't understand whether the OP is taking part of the flashlight off or just mounting the whole thing.

I am very electrically inexperienced, so it may be a rather dumb question...

ETA: To clarify my question, is the OP taking off the bottom flashlight part and just using the flashlight bulb, casing, and top cap thing on a conventional bulb socket/cord fixture?

Last edited by tetraontheedge; 01-29-2011 at 04:20 PM. Reason: clarification of question
tetraontheedge is offline  
post #12 of 64 (permalink) Old 01-29-2011, 04:39 PM
Planted Tank Enthusiast
 
jeffvmd's Avatar
 
Join Date: Apr 2010
Location: NYC
Posts: 898
Oops didn't read the question too well.
That's what being online and checking posts in the early morning does.

That probably is the way to go with that light, taking the bottom part off.
But will it fit the front arm of the edge? The casing seems to be a bit big to be accomodated under the hood.

Maybe toofazt can post pics of how it looks like.
jeffvmd is offline  
post #13 of 64 (permalink) Old 01-29-2011, 05:42 PM Thread Starter
The Weather's Here
 
toofazt's Avatar
 
Join Date: Jun 2005
Location: Bookings, OR
Posts: 1,250
Right now I have the bulb just zip tied to the end of the stock light bar. I'm not using the light tube it came with because it's literally 1/8" too big and the hood will not close the last 1/4". If you were to get rid of the stock light bar you could easily fit a couple of these 13W lights with the clear tubes protecting them. I'll get some pictures up later...


DIY Electric Shut-Off Valve ........... DIY Fluval Edge Light Mod
............................My Current Aquarium............................
toofazt is offline  
post #14 of 64 (permalink) Old 01-29-2011, 05:50 PM
Planted Tank Enthusiast
 
jeffvmd's Avatar
 
Join Date: Apr 2010
Location: NYC
Posts: 898
2 CFL's was what I did with my edge before
jeffvmd is offline  
post #15 of 64 (permalink) Old 01-29-2011, 06:06 PM Thread Starter
The Weather's Here
 
toofazt's Avatar
 
Join Date: Jun 2005
Location: Bookings, OR
Posts: 1,250
Quote:
Originally Posted by jeffvmd View Post
2 CFL's was what I did with my edge before
I don't like those type of bulbs because instead of one fluorescent loop there's two and the one on top is blocked by the one on the bottom. They're made to disperse light 360 to light up a room. The bulb I used only loops once and there's a reflector to help direct the light into the tank.


DIY Electric Shut-Off Valve ........... DIY Fluval Edge Light Mod
............................My Current Aquarium............................
toofazt is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome