Here are the specs:
ADA Mini M
Solar Mini M Light
27 Watt PC
Power Sand S
Aquasoil Amazonia 3L
Amazonia Powder 3L
Ryuoh stone (from TPT)
5lb CO2 tank
Currently 1 to 1.5 bps
aqmagic nano diffuser
DIY Drop Checker
Cal Aqua 13mm lily pipes (From TPT)
Purchased clear tubing and reducer to switch out the green tubing that came with the eheim.
I wanted to find a cheaper alternative for high quality tubing, and was able to.
Used the site www.sidewindercomputers.com
-----3/8 "to 1/2" reducer
-----6 feet of 1/2" durelene pvc tubing
-----1 foot of 3/8" durelene pvc tubing
Really wonderful tubing that isn't too stiff and fits perfectly with the lily pipes and the eheim quick disconnects.
DIY Garden mat:
Made from a rubber drawer liner that I purchased at a Dollar Store
here in NYC. I cut the mat to the size of the tank and placed it between the
tank and the lighting stand of the Solar Mini M.
Plants: Glosso and HC (from Pacific Aquarium on Delancey Street here in NYC)
Fauna: Will be: White Cloud Mountain Minnows (currently in a holding tank) and Cardinal Japonica or Cherry Shrimp (breeding in my other tanks)
So far I'm dosing 1ml of Flourish Potassium and .5ml of Flourish Trace after a
50% water change every morning
I will eventually be doing weekly water changes of 1/3 of the tank once my
plants start to establish.
Between 8 to 10 hours during the day
I have a curious cat so I keep a cover on the tank when I'm not home.
Went to a sign/glass company in Queens and had 1/4" glass cut to 12" X 8" for $10. Fits perfectly, especially with the metal tabs that came with the
tank for an optional top.
Here are some random snaps of my progress
Because my power sand and solar mini m light were on backorder from ADG
and got held up in customs, I decided to run my Eheim 2211 as an
additional filter on my fluval edge tank. Then I purchased some white
cloud mountain minnows for the fluval, however, they started eating my
cherry shrimp babies. So I made a quick tank with a glass orchid container
that I had leftover and put the minnows in there as well as my eheim 2211
and a whisper 30 filter. Once the light and sand came, I switched the eheim
to the ADA Mini M and kept the whisper on the minnow tank. The filter has been on the other tanks for about 4 to 4.5 weeks. I was adding nutrafin cycle on the white cloud tank with the eheim, mainly
because I found the bottle that I never used that came with my fluval edge,
and just wanted to give it a try.
progression shots of setting up the eheim 2211
So the dry scape:
I started with placing a layer of bacter 100 and clear super before I added
the power sand. Then I used a good amount of Power sand to aid in making
the large slope in the back of the tank. I made sure to keep the power sand
a couple centimeters away from the front of the tank. Then I added
a little more bacter 100 and clear super. Then came the Aquasoil Normal
type. I used the entire 3L bag. I sloped it with a baking spatula. Placed my rock setup which I had been contemplating for months (believe it or not), found a scape I enjoyed. Used the golden ration of 1:1.618. Then added a
little bit of power sand.
planted January 7, 2011
The tank is mainly HC. However, I found some really sexy glosso at Pacific
Aquarium and decided to plant the glosso in the back left corner in the photo.
I didn't plant too much glosso, but I mixed in some HC with it as well. I think
it may give the tank a nice contrast in depth and color. Experienced some
water clouding the past couple of days. So I've been Just doing daily
water changes and replanting the HC or Glosso that comes loose and
floats to the top. I planted the HC in clumps of three or four. Planting
was a little more difficult than I had predicted. It took a lot of patience,
especially trying to maintain the slope while planting, misting and slowly filling with water.
But once the water reached the top and the substrate adjusted a hair and resettled
from the vigorous planting, was I happy with the initial outcome. I honestly spent
hours yesterday watching the water circulate and the plants pearl.
My next project is going to be drilling the IKEA cabinet for the filter tubing. Best, el g