When Do I Dose? - The Planted Tank Forum
 
LinkBack Thread Tools Display Modes
post #1 of 8 (permalink) Old 03-05-2013, 08:17 PM Thread Starter
Algae Grower
 
Join Date: Jan 2013
Location: Washington
Posts: 22
When Do I Dose?

I'm going to be doing a 10 gallon Dwarf Hairgrass tank. Two 13w 6500k CFLs, DIY C02 at 1bps, inert substrate. I will be EI dosing, meaning I will have KNO3 and KH2P04 for macro nutrients, and Seachem Flourish for micro.

My question is: When should I start dosing? As soon as the plants are planted? Or do I wait a certain time?
AfricanCichlids is offline  
Sponsored Links
Advertisement
 
post #2 of 8 (permalink) Old 03-05-2013, 10:50 PM
Algae Grower
 
JeffHerr's Avatar
 
Join Date: Mar 2010
Location: Valparaiso, IN
Posts: 102
When Do I Dose?

Start dosing right away.

Also, know that you likely need Flourish Trace to round out your flourish Comprehensive. Or, bag it all and buy dry CSM+B.
JeffHerr is offline  
post #3 of 8 (permalink) Old 03-05-2013, 11:26 PM
Wannabe Guru
 
latchdan's Avatar
 
Join Date: Sep 2007
Location: Paso Robles, Ca
Posts: 1,038
Quote:
Originally Posted by JeffHerr View Post
Start dosing right away.

Also, know that you likely need Flourish Trace to round out your flourish Comprehensive. Or, bag it all and buy dry CSM+B.
Are you sure Jeff? I used just Flourish comp for my micro fert for years and had great results. I recently ran out and had some CSM+B and I still think I like the flourish better.

From my understanding and I could be wrong Flourish trace and comp are similar except comp is more concentrated and has some nitrates and phosphates.
latchdan is online now  
post #4 of 8 (permalink) Old 03-05-2013, 11:35 PM
Planted Member
 
bankruptjojo's Avatar
 
Join Date: Feb 2013
Location: KCMO
Posts: 244
looks like the trace has some things the comp doesn't.... i have only dosed comp in my low/med light tanks with no problems. on my higher light tanks i use the dry ferts CSM+B.

flourish comp.
Total Nitrogen
0.07%
Available Phosphate ( P2O5)
0.01%
Soluble Potash
0.37%
Calcium (Ca)
0.14%
Magnesium (Mg)
0.11%
Sulfur (S)
0.2773%
Boron (B)
0.009%
Chlorine (Cl)
1.15%
Cobalt (Co)
0.0004%
Copper (Cu)
0.0001%
Iron (Fe)
0.32%
Manganese (Mn)
0.0118%
Molybdenum (Mo)
0.0009%
Sodium (Na)
0.13%
Zinc (Zn)
0.0007%

trace
Boron (B)
0.0028%
Cobalt (Co)
0.00003%
Copper Cu)
0.0032%
Manganese (Mn)
0.0085%
Molybdenum (Mo)
0.0003%
Zinc (Zn)
0.0169%
Rubidium (Rh)
0.000008%
Nickel (Ni)
0.000003%
Vanadium (V)
0.000002%
Derived from: copper sulfate, cobalt sulfate, manganese sulfate, boric acid, sodium molybdate, zinc sulfate, rubidium chloride, nickel chloride

8g Fluval 1M CT Betta
125g 5 Blood parrots, 1 Green Severum, 8 Dension Barbs, 10 Yoyo Loaches, 1 RTS
75g Angelfish, 3 EBGR, 4 Siames Alage Eaters, 12 Harlequin Rasboars, 1 BN Pleco, 1 Swordtail
33g long cherry shrimp, 8 pygmy corys, 5 ottos
15g 2 GBR
bankruptjojo is offline  
post #5 of 8 (permalink) Old 03-06-2013, 01:41 AM Thread Starter
Algae Grower
 
Join Date: Jan 2013
Location: Washington
Posts: 22
Thanks for the help.

I think I'm still going to go with the Comprehensive.

One last question: How do I dose with the dry ferts... Can I just add them straight from the bag to the tank, or do I have to dissolve it in separate tank water first?
AfricanCichlids is offline  
post #6 of 8 (permalink) Old 03-06-2013, 03:41 AM
Moderator
 
Darkblade48's Avatar
 
Join Date: Jan 2008
Location: Toronto/Singapore
Posts: 10,183
Quote:
Originally Posted by AfricanCichlids View Post
One last question: How do I dose with the dry ferts... Can I just add them straight from the bag to the tank, or do I have to dissolve it in separate tank water first?
Either is fine, whatever is more convenient for you.

Anthony

A Primer to Pressurized CO2 and A Primer to Planted Tanks
Eheim Pimp #362 - Eheim 2213 x2, Eheim 2028, Eheim 2217, Eheim surface skimmer and Eheim autofeeder.
Victor Pimp #33 - HPT272-125-350-4M
Darkblade48 is online now  
post #7 of 8 (permalink) Old 03-06-2013, 04:02 AM
Planted Member
 
bankruptjojo's Avatar
 
Join Date: Feb 2013
Location: KCMO
Posts: 244
if your dosing a 10g tank i dont think you can really measure the right amount. you will have to dilute it in water. for anything smaller then a 55g its just to hard to measure in dry form. i think there is a dry to liquid calculator out there some where...

8g Fluval 1M CT Betta
125g 5 Blood parrots, 1 Green Severum, 8 Dension Barbs, 10 Yoyo Loaches, 1 RTS
75g Angelfish, 3 EBGR, 4 Siames Alage Eaters, 12 Harlequin Rasboars, 1 BN Pleco, 1 Swordtail
33g long cherry shrimp, 8 pygmy corys, 5 ottos
15g 2 GBR
bankruptjojo is offline  
post #8 of 8 (permalink) Old 03-06-2013, 05:46 AM Thread Starter
Algae Grower
 
Join Date: Jan 2013
Location: Washington
Posts: 22
Quote:
Originally Posted by bankruptjojo View Post
if your dosing a 10g tank i dont think you can really measure the right amount. you will have to dilute it in water. for anything smaller then a 55g its just to hard to measure in dry form. i think there is a dry to liquid calculator out there some where...
Its 1/8 of a teaspoon of KNO3, 1/32 of a teaspoon of KH2P04, and 1/32 of a teaspoon of trace ferts. Luckily I actually have teaspoons that go that low.
AfricanCichlids is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome