The Planted Tank Forum - View Single Post - DIY Automated dosing/topoff
View Single Post
post #1 of (permalink) Old 11-09-2004, 10:18 PM Thread Starter
Planted Tank Enthusiast
PTrader: (1/100%)
Join Date: Feb 2003
Location: San Juan Capistrano, CA
Posts: 670
Send a message via AIM to IUnknown
DIY Automated dosing/topoff

I'm planning to finally order this stuff. Here is the journal that I've written up,

For under $100, you can put together an automated dosing or evaporated water top off system. The system I designed allows me to dose 1mL up to 14mL of fertilizer, into my canister filter line, any day of the week. For a top off system, measure your average evaporation and determine how much R/O water to add using the SP100 cut sheet. I use a simple digital timer, the DT17 (available at HD), to dose (minimum of one minute). The SP100 Peristaltic Pump is available from I selected the 15 RPM motor that uses 1/16" ID Norprene tubing to dose .9 mL per minute. I could have used silicone to get closer to 1 mL per minute but I was worried about back pressure in my canister filter. I've added a check valve and TEE to feed the fertilizer directly into my canister. The following is a list of adapters that I got from You can also simply dose the fertilizer straight into the tank.

1/16" tubing neoprene 2'
1/8" tubing neoprene 2'
1/4" tubing neoprene 2'
0706-103 1/8"x1/16" reducing connector
0706-153 1/4"x1/8" reducing connector
5111-0-03 PP tubing check valve 1/4"
0715T-050 1/4"x1/4"x1/2" polyethylene TEE

IUnknown is offline  
For the best viewing experience please update your browser to Google Chrome