Par rating for medium light? - The Planted Tank Forum
 
LinkBack Thread Tools Display Modes
post #1 of 11 (permalink) Old 12-17-2012, 08:02 AM Thread Starter
Planted Member
 
rollinghills's Avatar
 
Join Date: Sep 2011
Location: new york, new york
Posts: 166
Par rating for medium light?

What's considering medium light? Read the posts here one says it's 30-50 while another says 70 to 150. Maybe I'm just reading it wrong. Anyway what type of light would 2x 14w spiral CFLs give me? My hood has 2 bulb bases in the middle. The bulbs will be in a horizontal position.

This is the bulb I'm considering.
http://www.amazon.com/TCP-TruStart-5...ords=tcp+6500k

The light is 12in from the substrate. It's for a 15 gallon tank.
rollinghills is offline  
Sponsored Links
Advertisement
 
post #2 of 11 (permalink) Old 12-17-2012, 08:15 AM
Moderator
 
Darkblade48's Avatar
 
Join Date: Jan 2008
Location: Toronto/Singapore
Posts: 10,012
35 - 50 mmol per square inch of PAR would be considered medium light. Not sure where you got the 70 - 150 mmol per square inch numbers from.

Any reflectors?

I would say medium light, given that you are mounting it horizontally, and the likelihood that you don't have a good reflector, etc (loss of light due to restrike).

Anthony

A Primer to Pressurized CO2 and A Primer to Planted Tanks
Eheim Pimp #362 - Eheim 2213 x2, Eheim 2028, Eheim 2217, Eheim surface skimmer and Eheim autofeeder.
Victor Pimp #33 - HPT272-125-350-4M
Darkblade48 is offline  
post #3 of 11 (permalink) Old 12-17-2012, 01:03 PM
Planted Member
 
Join Date: Nov 2010
Location: Portland, Me.
Posts: 255
Quote:
Originally Posted by Darkblade48 View Post
Not sure where you got the 70 - 150 mmol per square inch numbers from.
Here:

PAR Data-Spiral Power Saver Bulbs, lighting question
Sluggo is offline  
post #4 of 11 (permalink) Old 12-17-2012, 05:33 PM Thread Starter
Planted Member
 
rollinghills's Avatar
 
Join Date: Sep 2011
Location: new york, new york
Posts: 166
Yea that's the one. Sooo which is right?

My hood does come with a reflector.
rollinghills is offline  
post #5 of 11 (permalink) Old 12-17-2012, 05:37 PM
Planted Tank Guru
 
Seattle_Aquarist's Avatar
 
Join Date: Jun 2008
Location: Seattle, WA
Posts: 3,103
Quote:
Originally Posted by rollinghills View Post
What's considering medium light? Read the posts here one says it's 30-50 while another says 70 to 150. Maybe I'm just reading it wrong. Anyway what type of light would 2x 14w spiral CFLs give me? My hood has 2 bulb bases in the middle. The bulbs will be in a horizontal position.

This is the bulb I'm considering.
http://www.amazon.com/TCP-TruStart-5...ords=tcp+6500k

The light is 12in from the substrate. It's for a 15 gallon tank.
Hi rollinghills,

What size aquarium; what depth to the substrate?

Roy
45 Gallon Tall; 96 Watt AH Supply CF; 6700K; & 30 Gallon Long; 2X36 Watt AH Supply CF; Press. CO2; UGF; Heat Treated Montmorillonite Clay
Greater Seattle Aquarium Society (GSAS)

Seattle_Aquarist is offline  
post #6 of 11 (permalink) Old 12-17-2012, 05:41 PM Thread Starter
Planted Member
 
rollinghills's Avatar
 
Join Date: Sep 2011
Location: new york, new york
Posts: 166
It's 15 gallon. Light is 12 inch to the substrate.
rollinghills is offline  
post #7 of 11 (permalink) Old 12-17-2012, 05:49 PM
Planted Tank Guru
 
Seattle_Aquarist's Avatar
 
Join Date: Jun 2008
Location: Seattle, WA
Posts: 3,103
Hi rollinghills,

In my low tech, non-CO2 10 gallon I use 2X 10 watt cfl with good results. I do dose Seachem Flourish Comprehensive and Seachem Flourish Excel as a carbon source.


Roy
45 Gallon Tall; 96 Watt AH Supply CF; 6700K; & 30 Gallon Long; 2X36 Watt AH Supply CF; Press. CO2; UGF; Heat Treated Montmorillonite Clay
Greater Seattle Aquarium Society (GSAS)

Seattle_Aquarist is offline  
post #8 of 11 (permalink) Old 12-17-2012, 09:10 PM
Moderator
 
Darkblade48's Avatar
 
Join Date: Jan 2008
Location: Toronto/Singapore
Posts: 10,012
Quote:
Originally Posted by Sluggo View Post
Quote:
Originally Posted by rollinghills View Post
Yea that's the one. Sooo which is right?

My hood does come with a reflector.
Should ask Hoppy or i4x4nMore where they got those numbers from.

Though i4x4nMore has not been active since August 2012.

Anthony

A Primer to Pressurized CO2 and A Primer to Planted Tanks
Eheim Pimp #362 - Eheim 2213 x2, Eheim 2028, Eheim 2217, Eheim surface skimmer and Eheim autofeeder.
Victor Pimp #33 - HPT272-125-350-4M
Darkblade48 is offline  
post #9 of 11 (permalink) Old 12-17-2012, 09:19 PM
AVN
Wannabe Guru
 
AVN's Avatar
 
Join Date: Oct 2012
Location: SoCal
Posts: 1,082
around 40-60ish is med, anything above is high or extremely high.
AVN is offline  
post #10 of 11 (permalink) Old 12-19-2012, 08:39 AM
Planted Member
 
Join Date: Jan 2012
Location: Columbia, MO
Posts: 275
Look at the meters reading/ units. Looks like it isn't in inches
biogenetic40379 is offline  
post #11 of 11 (permalink) Old 12-19-2012, 09:36 PM
Moderator
 
Darkblade48's Avatar
 
Join Date: Jan 2008
Location: Toronto/Singapore
Posts: 10,012
Quote:
Originally Posted by biogenetic40379 View Post
Look at the meters reading/ units. Looks like it isn't in inches
PAR is usually measured in umol per metre squared per second; the PAR meters in i4x4nMore's and Hoppy's post are measured in the same units.

Anthony

A Primer to Pressurized CO2 and A Primer to Planted Tanks
Eheim Pimp #362 - Eheim 2213 x2, Eheim 2028, Eheim 2217, Eheim surface skimmer and Eheim autofeeder.
Victor Pimp #33 - HPT272-125-350-4M
Darkblade48 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome